During the process of using this radiator fan, I found that its heat dissipation effect was very excellent, and I could obviously feel the decrease of computer temperature.And its noise is very small, almost won't affect my work and life.This radiator fan is very affordable and cost-effective.Compared with the radiator fan of other brands, its performance and quality are excellent, and the price is OK
The fan is very big and the radiator is very light. I was afraid the radiator was too heavy and bought a special fastener, but it is actually very light.The heat dissipation effect is very good. It turns more than 400 times under normal conditions. There is no sound. It's very good.
The lights are useless, so I don't want to buy bright ones. I have to complain that if the fan is too large, it may be crowded if I add memory modules.There is also the so-called six tubes, each of which has a very small diameter, and the copper contact area cannot cover the entire CPU.Other textures are good.
It is much better than the original radiator. It is easy to press 11900kf.The built-in radiator runs like a tractor, which is too quiet.It's just that the dynamic load is not very good. At the beginning, the rotating speed did not rise when the pressure was a little poor, which led to a short time of frequency reduction. Everything else is OK.
I didn't leave a picture. The 7600 I used is OK, but I feel that the air volume of one fan is not enough. Everything else is OK. I also feel that the thermal conductivity of the gt3 is not bad
The original cooling fan is AMD5600 original fan. When copying documents, the maximum temperature reaches 80 degrees, and the normal temperature is around 50 degrees. After replacing K6, the normal temperature is only about 35 degrees. The effect is particularly obvious, and the cooling is obvious