Comments on finalcool Pro matte M1Pro (1mm thick copper sheet)

Both of them are second-hand. The workmanship of the copper pieces is poor, and there is a cut in the hand. The temperature does not drop at all, which is useless. The goods are different from those in the video, which is too bad

The 20 yuan thing was unexpectedly exquisite after receiving it. I originally wanted to buy a radiator to replace the m.2 port without a vest. When I opened it, I found it was an exquisite small box. It's very beautiful, the production process is exquisite, and the material is also very good! Give me a like!

Very good. I added an additional layer of heat conductive paste, which has a very obvious effect when used in high strength.

Not bad. I felt that the notebook SSD could be used for cooling. I gave a screwdriver and several spare screws as gifts.

There was no obvious improvement. I felt that there was more comfort in my mind if I didn't paste it. How many degrees might it have been reduced?

I bought several and put them on my notebook hard disk. Make half stick and half ribbon to increase the heat dissipation area.

High appearance, high quality, very good. Every penny is worth every purchase. The material, appearance and quality are very high-grade at first sight. I like it very much

It's good. I bought a laptop with 2mm copper plate. I can't put it in, but I only installed a heat dissipation silicone grease chip. But the standby temperature is 29 degrees. The cooling effect is good. I use Kingston's 1T solid state

Don't buy a heat sink. It's better than nothing. It can't solve the problem of high solid temperature in my notebook

The 2mm copper sheet is good and thick. There are a lot of thermal conductive silica gel sent. There are 10 independent single pieces and one whole piece. fabulous.

It's still made of rubber band. It's easy to age in the hot environment

It's very good, but 2mm thick. I suggest you buy 1mm

The goods have been received! It feels good! Solid materials! Very good quality! There is basically no problem with ordinary use!

The package is very good, ultra-thin, and can be pasted into X1carbon.

After receiving the goods, they took them apart and used them. The quality is very good. They are no different from those bought on the official website!

The seller is really patient and answers all questions. Sometimes I'm embarrassed to ask. The installation is also simple. Just stick a silicon chip on the chip side (concave and convex surface) of the hard disk and then stick thermal copper. It's neither hard blowing nor black. It really has an effect, and it's obvious

It is just pasted. Compared with the original hard disk, it would be better if the rounded corner was repaired. I hope it can withstand the Armour Hero RC20

The heat sink is very heavy. The temperature has dropped by 4-5 degrees, which is effective.

Very thick. It is equipped with Zhiti 7100 to add solid state disk to Fantasy 16 2022. It works normally

After receiving it, the package was well packed. The copper sheet inside was very thin, and the heat dissipation effect was good at first sight. The installation is also quite convenient. It can be pasted directly, and the performance of the computer has been improved directly. With the modified fan, the heat dissipation problem of the notebook playing large games has been solved