Gigabyte B650 AORUS ELITE AX Comments

It is produced by international first-line factories, and its quality and workmanship are guaranteed. 2 × M.2 interface, enough to meet the expansion needs of most users.

Although it is a MATX version, it is equipped with 4 × DDR5 DIMM sockets, which can support up to 128GB of memory. Integrated with 2 × M.2 interface and 4 × SATA III interface, it has good scalability.

Power supply extended heat pipe cooling armor coupled with 12+2+1 phase power supply fully releases the full performance of the processor

A good motherboard is also very expensive, so I can't bear to use it.
I don't know whether it's Xinguan or something. I have no hope for the future, no desire for the present, less and less sense of security, and I can't bear to spend a penny.

This motherboard belongs to the highest end of the B650, even the X670. The splitting is good, and the new batch solves the problem of whistling. Gigabyte supports personal insurance, which is worth buying. If there is no need for so many interfaces, it is recommended to buy Xiaodiao. The high-end point goes directly to Super Diao, and there is no problem.

Give a suggestion to the Gigabyte manufacturer. I hope the BIOS upgrade function can be easier to use.

Finally, I did a good job. I bought a b650m on Taobao before, and the memory can only be used in the 3.4 slot, which is a real hassle. This generation of Aiguo Jia boards are very good. The low latency of the pbo memory and the like can be turned on by one button, and the running points can be increased by about 10%.
Let's talk about this board and the 650m board. The large board has an additional m2 hard disk slot. The power supply is stronger, but the power supply actually overflows.
An extra small part was provided. The chassis jumper can be installed first. It's easy to plug in the motherboard.
Compared with the small board, there is no optical fiber output, and there is an audio input interface.
The position of the bios battery is better than that of the small board. The small board needs to be removed from the solid armor. The others are not much worse.
The batch number is 2242, and the bios is still the first version. The small boards bought are also in this batch, and they haven't screamed. It seems that they have really all returned to the factory for replacement.
Finally, I chose this board simply because it is cheap and the materials used are fierce. The rest is to return the small board to the factory for a new one, and then sell it. I hope it will go well.

Brand new, the whole motherboard is too large, and the temperature of the thick heat sink motherboard should not be poor

The 1.2/3 version PCB is shrunk to 6 layers, and the network card is shrunk to RTL8852CE, which is useless at all. It can only be said that the price is cheaper than that of E-auction sculpture

Appearance: After looking at so many models, it's still Gigabyte. It looks exquisite. Every aspect is also good

Assembled a major computer brand, bought it for the first time, and after a period of time, it will be evaluated again. The performance is stable temporarily. Very good baby, novel style, full feel, comfortable electric sports field, who knows. They are all very suitable. I like this way. All five-star praise!

The motherboard interface is rich, and the heat dissipation vest is more than that of other companies. The video card installation location is also reasonable, and it will not compete with CPU and M.2 hard disk

This is the most high-end motherboard I've ever bought. The outer package looks much dirtier than the picture, and I don't know what I've experienced. The first time I bought a motherboard, there was no manual in it. The electronic manual said there should be a manual in the box. The motherboard itself has scratches. I don't know where it came from. I temporarily found that the 360 water-cooling speed is high, and the power consumption is not full. There have been several whistles, but there are no other major problems for the time being

Packaging protection: I can only say that I passed the exam. After all, I mainly focus on a compact model and cost performance, which is acceptable. I feel a little bit of ritual when unpacking. Installation difficulty: I don't recommend novices. The design is very compact, and the assembly sequence is required. In particular, the USB3.0 compatibility of the side is still very powerful. It is said that the 7950 can run well. Appearance: good-looking

When the CPU is under load, the power supply makes a noise. I can't stand the sound when I put the chassis on the desk. I don't bother to replace it because I don't want to install it

The board is very heavy. The location of the pcie interface is designed reasonably, and the rest of the interface locations will not be scrapped by the graphics card. The bios is also OK. It is recommended to change the hot plug for the sata interface in the default settings to disable, and also change the power off of the u interface to disable.

In contrast, Gigabyte's heat dissipation and pcb workmanship are better. The weight is enough.

Very good board, very good workmanship, the best among the products of the same level

Well, hey, hey, hey, it's just that the chassis is too small. You must choose a large one for XDM. Ha ha ha

It's really good, especially the two I bought later

Super Sculpture manufacturer needs to be reworked. They bought this first and used it. The board is very good, no problem. Basically pure white is also suitable for evo rgb. It is the first time to use this bios, and it is still in the process of exploration