Comment on overclocking three GI-X6B V2 red aperture 1700 fastener version

Comprehensive score
nine point nine branch
  • Product Comments (12)
  • With figure
  • With video

AMD FX8320 processor, AM3+interface, TDP125W. Previously, the downpressed four heat pipe cooling fan was used. The standby temperature of the CPU in summer was 30 ℃, and the standby temperature after using the overclocking Sandong Sea x6 was about 22 ℃ (there is a screenshot of Lu Daning's temperature measurement). In the case of medium intensity use, the original temperature was about 70 ℃, but it was less than 50 ℃ after using the overclocking Sandong Sea x6.

Published 20 days ago fabulous comment

AMD FX8320 processor, AM3+interface, TDP125W. Previously, the downpressed four heat pipe cooling fan was used. The standby temperature of the CPU in summer was 30 ℃, and the standby temperature after using the overclocking Sandong Sea x6 was about 22 ℃ (there is a screenshot of Lu Daning's temperature measurement). In the case of medium intensity use, the original temperature was about 70 ℃, but it was less than 50 ℃ after using the overclocking Sandong Sea x6.

Published 20 days ago fabulous comment

The overclocking Sandong Sea R4000 is a very good fan. The I5/i3 can easily cope with it. The temperature is suppressed below 55 °, which has a good heat dissipation effect. In addition, the fastener installation is also very easy, and the temperature control fan is very quiet!

Published at: 03:04, May 9 fabulous comment

The overclocking Sandong Sea R4000 is a very good fan. The I5/i3 can easily cope with it. The temperature is suppressed below 55 °, which has a good heat dissipation effect. In addition, the fastener installation is also very easy, and the temperature control fan is very quiet!

Published at: 03:04, May 9 fabulous comment

The overclocking Sandong Sea R4000 is a very good fan. The I5/i3 can easily cope with it. The temperature is suppressed below 55 °, which has a good heat dissipation effect. In addition, the fastener installation is also very easy, and the temperature control fan is very quiet!

Published at: 03:03, May 9 fabulous comment

The overclocking Sandong Sea R4000 is a very good fan. The I5/i3 can easily cope with it. The temperature is suppressed below 55 °, which has a good heat dissipation effect. In addition, the fastener installation is also very easy, and the temperature control fan is very quiet!

Published at: 03:02, May 9 fabulous comment

The overclocking Sandong Sea R4000 is a very good fan. The I5/i3 can easily cope with it. The temperature is suppressed below 55 °, which has a good heat dissipation effect. In addition, the fastener installation is also very easy, and the temperature control fan is very quiet!

Published at: 03:02, May 9 fabulous comment

The installation is very simple, and the cooling effect is very good. The CPU temperature is generally about 35 degrees, and the maximum is about 57 degrees

Published on: 05:46, March 2, 2023 fabulous comment

Quiet, press i7 toaster 6700K to easily keep it below 50 degrees, and it is still quiet and outrageous, benefiting people YYDS.

Published on: 10:59, January 4, 2023 fabulous comment

The radiator was provided with silicone grease. I didn't know when I bought it. I bought an extra one

Published on: 09:27, December 3, 2022 fabulous comment

Heat dissipation effect: very good
Mute effect: very good
Very handsome

Published at 11:11, November 24, 2022 fabulous comment

Very good. It still works without overclocking. I forgot to take photos when installing the machine. The installation process is very complicated, much more complicated than what I bought before. In short, the price is not overclocking. I can still use a radiator that works

Published at 01:28, November 14, 2022 fabulous comment

Installation is very difficult! Since the fastener is elastic, the small screws on the side are difficult to align, and the insertion of the screwdriver is interfered by the mainboard. In addition, there is no screwdriver in the package! To install small screws, a screwdriver with magnetic force must be used, otherwise it cannot be installed!
Heat dissipation effect: review after use
Mute effect: review after use

Published at: 08:00, November 11, 2022 fabulous comment

I bought them for the company and bought them back. They should be OK. I didn't receive bad feedback. I bought them for the company and bought them back. They should be OK. I didn't receive bad feedback. I bought them for the company and bought them back. They should be OK. I didn't receive bad feedback.

Published on: 01:34, November 11, 2022 fabulous comment

The 6700g uses this fan. It only turns on the League of Heroes CPU. The temperature has not fallen below 75 degrees. I feel that the heat dissipation is very ordinary

Published on: 09:59, October 20, 2022 fabulous comment

It is used for x99+e5 2666. The multi opening temperature is around 60. The blackening tower is beautiful and cost-effective yyds

Published on: 11:45, October 15, 2022 fabulous comment

Is it possible to build a mini low-speed wind tunnel for fun?

Published at: 10:58, October 6, 2022 fabulous comment

The accessories are complete. The E5 processor has low temperature, low noise, quiet, but it is too high. It has requirements for the chassis.

Published on: 06:41, September 10, 2022 fabulous comment

The things are very good. I didn't pay attention to the direction when I bought them, so I adjusted myself.

Published on: 07:12, September 3, 2022 fabulous comment

As always, good quality, a very favorite product, very good! o(* ̄︶ ̄*)。 The package is very good, and the quality is very good. The baby completely meets the seller's description, so you can buy it with confidence? thank?

Published on: August 23, 2022 08:28 fabulous comment
 WeChat group