Packaging protection: large boxes cover small boxes. I thought it would be very big. It is also the first time to buy a small motherboard. It is unexpectedly small and well protected
Installation difficulty: The installation is smooth all day long, except for the network card, which needs to be installed by yourself. Because the tools are not enough, small cross screwdriver and hexagon nut socket are needed, so the installation is slower Appearance: I like this appearance. It's really good Compatibility: very stable, with 12500
At present, the only B660ITX motherboard with pice5.0+dual drawer pcie4.0 M2+ddr4 can be purchased.The main tone is the primary tone, which is well received.
1. First, let's talk about why it's a handicap: the performance of the 12th generation single core is really attractive. I have always used the ITX chassis, and the 12600K silent frequency is OK. I can't solve the problem of overclocking cooling. I have used Taiwanese products for many years, and I support domestic products. 2. It is recommended to install win11 directly. Win10 basically does not support large and small cores, and win10 Cinebench20 has a score of more than 1000,Win11 goes directly to 6500, single core win11 scores 725 3. I do rhino modeling, rhino is also a strange software, with high requirements for single core performance and memory. The graphics card requirements are generally 1050 and 2060. Previously, there was a 1.5G model that can be operated smoothly, which is very cool 4. Heat dissipation and people benefit APX90 47 nickel plating can withstand, without pure copper 5. 9700K was used the year before last year, 5600X was used,In fact, the professional performance of 5600X is worse than that of 9700K. Even if the heat dissipation is OK after a long time of overclocking, the screen will be blue, so K running silent frequency is OK
The cool fish g5 small chassis is used. The overall appearance of the motherboard is still very beautiful. It is not difficult to install it. The CPU heat dissipation has not yet arrived, so I just lit up the computer to have a look. The effect is OK
At present, the b660itx motherboard with the highest cost performance ratio supporting ddr4 and two m2 ports has good workmanship and materials. The attached wifi network card needs to be installed by itself. The motherboard disadvantage: the bios is too poor. I hope to optimize the new version of bios as soon as possible in the future. The position of the motherboard pcie slot and the baffle is too long, so that some graphics cards with a backplane have compatibility problems,The back plate of the graphics card needs to be removed before it can be installed. This is a design defect. I hope the new version will be improved later. I am satisfied overall. After all, the price is fairly good
The express delivery is very fast, but my CPU has not arrived yet, and I haven't tried it yet. It looks good. Now I have something to do for the New Year.
Advantages: dual m2pcie4.0.The graphics card is pcie5.0x16.4 USB 3.0.The plastic bracket is very beautiful. I sent ax201WiFi as a gift.Integrated io baffle.The packaging is very exquisite.Four year warranty. Disadvantages: The bios is ugly.No port c.
The goods are very good, the logistics speed is also very fast, and I got an own dragon. When I saw that the self run store was still 100 yuan cheaper, I had no reason to apply for it for seven days, but the self run price rose at night. It seems that it's fate. I'd better keep it for myself
The packing is tight.The main board body is wrapped in an anti-static bag, which is carefully padded, and the interface layout is also good.At first, I didn't see the real object clearly, but found that it was not an integrated I/O baffle. It was connected to the motherboard with small screws, and the CPU buckles were blackened. On the whole, the appearance was good and the price was high.
It arrived very quickly. At present, there are not many ITX boards equipped with the 12th generation U. It seems that this is the only one for the ddr4. There is no problem with the lighting on the computer.It would be better if the attached wifi module could be installed at the beginning. I remembered that the wifi module was not installed until I installed it.
The product is very good. At present, the price of the b660 is relatively affordable. It has just arrived. It is very good to cooperate with the 12400 installation
The first time I used Yingtai's product, I saw that it was a 12th generation iU and ddr4 and had two m2s, so I chose it. Now it works normally. It's a very good board.
The cheapest b660itx motherboard that can be bought at present is for the cost performance. It is the first time to use the motherboard of Yingtai, with complete bios configuration and Chinese mode, which is quite easy.
It is recommended that the wiring of the network card be installed in this way. If it is wound from the screw side to the back of the network card, it will be pressed by the vest.The system has been successfully lit and installed.Other details need to be experienced.
Pretty good. SF delivered the goods. The express box was not damaged. All the necessary configurations of the board were available. The lack of integrated network card also left room for expansion of the demand for multiple m2.
The appearance is still very high. It supports ddr4, which is also a 660itx with high cost performance.The only thing that puzzles me is whether the HDMI is 1.4 or 2.0. The user manual includes 1.4 and 2.0.Generally speaking, it is recommended to install the 12600k after it arrives!
We have received the goods. The workmanship is quite solid and must be praised. The second-line brand products can do this. It seems that they are really diligent. Praise them!
Stable, good materials, more generous than ASUS MSI, just a BIOS stretch point.The vest C9BJZ with the default frequency of 3200CL16 turns on xmp, but the CL is 20, which needs to be manually changed to 16.The system can be accessed after overclocking to 3800, but the test will report an error. Now the default frequency is used.Note that the insertion method of the memory in the picture is an error demonstration. Two memories need to be inserted 2/4, and the insertion 1/3 will diagnose and report errors. The wonderful thing is that VGA reports errors, which troubles me for a long time.In addition, all the test software cannot correctly display the correct information of the memory, including Yingtai's RacingGT. The capacity and voltage are wrong.I hope the manufacturer can pay attention to the user experience, design the BIOS well, and provide some BIOS use tutorials and overclocking tutorials.
