This radiator is integrated 360 water cooling, with three 120mm cold exhaust fans, supporting ARGB, the maximum wind speed is 94.65CFM, and the maximum air pressure is 3.68mm water column, achieving good heat dissipation effect.The length of water pipe is up to 40cm, suitable for various cases.
A 60mm TORX3.0 fan is built in the cold head to help the power supply module around the motherboard dissipate heat.This design can further reduce the temperature of VRM
Equipped with a 2.4 inch LCD display, it can display a variety of images, including system hardware information, custom images, system time, etc., with high playability
The addition of high-end CPU requires MSI MEG CORELIQUID S360 flagship all-in-one water cooling.In addition to the cold head embedded in the 60mm TORX3.0 fan, this product helps the power supply module around the motherboard dissipate heat.At the same time, it is also equipped with a 2.4 inch full-color LCD display, which can display a variety of images, including system hardware information, custom images and system operating conditions.Bully?In addition to the advanced cold head, 360 blackened heat exchanger and MEG SILENT GALE P12 silent fan constitute a perfect heat exchange system.
In design, it is more in line with MPG's consistent future and e-sports style. It is less profound, but more fashionable. Also, a 60mm TORX 3.0 fan is built in the cold head, which can cool and cool the components around the CPU.Moreover, the water-cooling head is also equipped with a 2.4 inch LCD screen, and players who like tossing can customize the display content.
It is equipped with a 2.4 inch LCD display that can display a variety of images, including system hardware information, customized images, system time, etc
It's not too strong. Press 12900k to stand by for 20 degrees... P5.2 e4.1 1.3v full core run only has 80 degrees... the best companion of 12900k.In addition, when installing, remember to apply some silicone grease around the CPU top cover
The design of this cover is really * *...The water cooling line can always block the cover in a strange way, unless you are at the side of the cold discharge line. My installation method is very difficult, and I'm afraid of breaking the water pipe
The standby cooling is OK, within 40-43 degrees!It's summer!
They were not given five stars. Before the first purchase, they repeatedly confirmed that they could use dynamic pictures. During the day, they asked, but at night, they changed their views. They could only use static pictures!This is not the end. It must have 240 * 320 resolution. Do you think it is the end?It's naive. The image format must be BMP format. Many images do not have this format. I can't buy an image converter member. I found that GIF images cannot be converted into BMP images! Before buying, we should consider that the display is somewhat dark, the software brightness is 100%, and the monitoring mode is shown in the figure!I'd better buy Enjie instead!
The effect of pressing 5900x is OK, and the baking machine does not exceed 80 ° (130w) without opening the pbo.The x570unify motherboard turns on the pbo, and the toaster is stable at 90 ° (167w). When the motherboard game boot mode is turned on, the toaster is directly 110 ° (230w, and the front ship H150i rgb pro xt directly has a black screen). The noise of the toaster is very good, not noisy. Compared with the H150i, the noise level is very satisfactory.
Heat dissipation effect: excellent heat dissipation effect 10900k single fpu, stable 74 ℃ for one hour
Air volume Wind force: sufficient air volume, more customized mode Mute effect: preset balance, AI mode is very quiet, game and custom mode sound is acceptable Easy to install: easy to install Appearance: excellent appearance, I like it very much. I like the customized screen very much Product packaging: the packaging is complete and well protected
Air volume and wind force: the wind is quite strong Mute effect: compare mute Easy to install: very simple to install Appearance: LCD screen looks very high-end Product packaging: used in conjunction with MSI motherboard Heat dissipation effect: 5900x silent frequency standby 45 degrees, which is similar to the 8 heat pipes I bought in 200
The face value is very high, and the fan sound is almost inaudible in silent mode. The heat dissipation capacity is strong. Before 11700kf, I used 240 water for cooling, the standby temperature was 40 ℃, and the game temperature was 85 ℃. Now, the standby temperature is only more than 30 ℃, and the game special effects are not more than 60 ℃.
Finally, I used this one. Finally, I resisted the impulse to buy at full price. When I bought the 618 pre order, it would not be lower on the day of 618!In use, the temperature of the roast chicken in the case of the top and side cover of my large airtight tank case finally failed to pass the test. The temperature of the roast chicken was about 90 degrees, and the side cover of the roast chicken was not tested when the side cover was opened. Anyway, the original top and side cover of the frost tower were restarted in 1 minute, and the side cover was removed. The stability was 80+after 20 minutes. So it seems that the k360 without side cover should be able to drop to 60+or 70%. After all, it is a large airtight tank,It's very uncomfortable not to cover the side cover all the time. This time, the chassis can finally be covered. Playing the game is more than 50 degrees. It's very fierce. It took a little time to install water cooling for the first time, but the process is very comfortable. Men enjoy their own fun. Heat dissipation effect: fierce Air volume and wind force: fierce Mute effect: slow down at full speed Convenient installation: In fact, it is very simple. I am not skilled in installing the wrong ones several times, but I still finished it myself. Happy?.
Not much to say. The above picture shows the effect. The fan effect is cool. The breathing light and color can be matched, and the sound is very quiet. You don't need to configure it separately later
I was worried about overturning before I bought the car, but I felt it was good after I bought it. It's icing on the cake that the cold head with fan blows to the motherboard. The built-in screen can display a lot of information and can also be customized. After installation, I ran down the fpu toaster with aida64,The CPU is i7 13700k, and the temperature of the 10 minute baking machine CPU is kept at about 80 degrees, which performs well. The standby temperature is slightly higher, about 40 degrees. This time, the accessories are all MSI whole family buckets. The fan may be at full speed just after installation, and the noise is slightly loud. After the mainboard msi center software is installed and the GI automatic temperature control is turned on, it is almost quiet,The CPU and GPU are both stable at about 40 degrees, and the silence is fairly standard. The only thing I worry about now is no leakage, no leakage, no leakage!Important things are to be repeated for 3 times.
The MSI motherboard I bought earlier was reported to the after-sales department for direct replacement when it had problems due to my reasons. I am very grateful to the after-sales department at that time, so this time I chose the MSI motherboard water-cooling for the update accessories.But today, from 6:00 to 10:00, because the water cooling problem was repeatedly tried, the water cooling did not work, and it was useless to plug in the cpu fan sysfan, and it was confirmed that it was not the problem of the motherboard after replacing other standby water cooling.It's no problem to exchange. Let's have a look again.
