This is just so so. The golden screw hole is bigger than the black screw hole, so I can rotate the screwdriver all the time, just like the thread slipped. So I had to unscrew the golden screw hole with the big hole and install the spare one. A total of nine golden screw holes were replaced. Fortunately, I have a spare golden screw hole. I am very satisfied with the rest,The gold screw hole does not match the black screw. I hope Xingu will pay attention to this situation in the future.
I know that the chassis must be large, but I didn't expect it to be so large. The workmanship is good, the details are rich, and the wiring is too convenient. Give me a copper pillar sleeve, but the materials can't be said well. The 0.7mm plate is still very soft. Why do the screws on the main board slip?So only four stars can be given.Fortunately, I didn't believe that the Internet said that the heat dissipation of the hoisted video card was getting worse. After installing the video card, I was able to fully load it instead of hitting the temperature wall first. The temperature of the fully loaded video card was 82 ℃, so I replaced the outlet fan later.
Buy this case for the second time.I sold my American merchant pirate ship and replaced it with this chassis.Although the space is much smaller, it is OK.The previous one was too big.This case is just fine.Not big or small.The video card is installed vertically.360 can be used before and after water cooling.The quality of workmanship is very good.
Chassis ATX3.0.Install the graphics card vertically.The quality and workmanship are quite good.The board is a little thin.The space is suitable.Front and rear 360 water cooling can be installed.The front 360 water cooling is a little cramped.The heat dissipation of single duct is better than that of multi duct.As long as a good fan is used, the heat dissipation effect will not be poor.
The board is thin, plastic parts are used more frequently, and the hands are light. Especially the top cover and both sides of the front panel are made of plastic. There are too few choices for 3.0 chassis, so let's use it.
The chassis is very large. Many people don't read the manual. Several 3.5-2.5 hard disks can be installed on the back of this chassis. I was almost misled by many people in the comment area. Generally speaking, it is easy to use, easy to install, and cost-effective. I am satisfied.
Everything is very heavy after being loaded, and there is no place to lift it!3.5 The hard disk bit is occupied by the power outlet, which is not suitable for multi hard disk users.
I like it very much. The chassis is a little heavy, but the texture is very good. The glass is pure and removable.The design of the chassis is very grand. It moves forward and then exits, but the graphics card may block the air duct, but I still like it on the whole.The io mouth is very comfortable at the top, so you don't need to touch the back anymore.
Appearance: The video card is installed vertically, which is good. The USB interface can be fully used, and it is no longer necessary to bend over to plug in the back. I don't know why the anti human design can be delayed until now. Internal space: other parts haven't arrived yet. I don't know what the internal space is like
Very good, convenient installation, good details, many old design defects have been changed from Kai Yuan k1, the most intuitive thing is that the temperature of the graphics card has dropped
