Phanteks PH-F140HP Comments

Very good. I just installed it on the air outlet at the 12 hole position of the black hole chassis. It can't be put in gently. It needs to be pressed in slightly without too much force. The three internal fans of the black hole chassis do not support automatic speed regulation, so they were replaced.
Heat dissipation effect: good
Air volume Wind force: large air volume
Mute effect: Mute
Easy installation: too convenient, but the rubber pad is too small and useless.
Appearance: good looking
Product packaging: double-layer carton packaging

The fan air volume and mute effect are both good, but it seems that the hole spacing is 12 inches, and the installation is slightly different from what was expected

There is nothing to dislike about this fan. The only thing I can't accept is what the product manager thinks? The fan cable is only 20 cm long, which is simply too short! I finally had to buy a fan hub.

The price of the fan is appropriate. The 14cm fan blades must have a large air volume, and several fans will be stocked up at the same time to catch up with the event. At that time, you can replace the CPU heat sink, and then increase the large air outlet.

The product has been received, but has not yet been unpacked for use. The habitual praise reserves the final opinion. This fan was bought by hand. In order to make the shop assistant cheaper, the price of the video card this year is high, so I don't even have the desire to install the machine. I feel that the supporting products can be sold, and I don't know how to use the 750 watt power supply. Alas, I am speechless.

Good fan! Really quiet, and high appearance. I installed two rows of fans at that time. After starting up, I was invincible. I pulled out a row of fans of another brand. The world was quiet when only this fan and the cup fan were left

At the moment, the wind pressure of 14 cm rotating at high speed at the back of my case is larger than that of 12 cm. If the machine can fit 14 cm wide, you must buy 14 cm wide instead of 12 cm wide. Although this one has no color, it has a big nine in the airport.

The fan is of good workmanship, and the air volume is large enough. It is quiet. I don't know what to think when designing. The power cord is short enough to be cold. I don't want to bother to return. I bought an extension cord before installing it.

Very powerful, improved temperature, 14 fan, 12 hole

The fan of the wind seeker has a large air volume and a good mute effect. This one was bought together with the CPU radiator. The radiator has two fans. It's better to buy three of these fans. It's very nice!

The things are OK, they haven't been installed yet. But the screw hole is 12cm

The fan is very big and beautiful. It took a long time to find a 14cm pure white fan. It is very beautiful to cooperate with the white sun god. It is highly recommended. The quality and workmanship are good, and the air volume and wind speed can meet daily needs. After installation, the temperature of the chassis drops a few points in an instant. The packaging is also very beautiful. The wire ends and wires are also wrapped. Just like the sun god's own fan

When used as the CPU heat sink, there is no problem at all. The wind is enough and the sound is muted. The disadvantage is that the cable is too short. When the chassis space is large, it needs an extension cable to connect it together.

The fan is very good, the air volume and wind force are both good, the boss is set to moderate speed, also very quiet, compatibility is the highlight, the 14cm fan screw hole 12cm is very good, but the price is really a little expensive, a little expensive

Appearance: good appearance, moderate wind power, not too loud. The black ice 400 cannot be put down. It's far from the original fan. I'm disappointed

In silent mode, the standby temperature is reduced from 41 ℃ to 32 ℃, and the full load temperature is reduced from 77-8 ℃ to 55-6 ℃. The effect is very obvious. There is only resonance sound at high speed.

Heat dissipation effect: adjust the maximum speed, the air volume is large, and there is no noise.

The hole pitch of 14cm fan 12 can load the top of Q300L, and the silence is not as obvious as 1200 upward. The air volume is large enough, with two inlets in the front and one exhaust at the top. The effect is very good.

The heat dissipation effect of the fan is good. The wind is very strong. There are several fans on the top of each fan, which is much better than a dozen fans. The low-speed silence is good, and the wind sounds at high speed, but there is no other sound, not bad. The fan looks much larger than 12. Although the hole pitch is 12, it can't be installed in the front and back of the chassis. I installed it on the side, and the heat dissipation effect is also good. In addition, the line is a little short, and there is no extension line. This needs to be improved.

If I hadn't bought several fans from fans chasing the wind, I really think they should be called "wind bucklers". The fan bought by the fan chaser before was provided with an extension cable, a split cable and a shock absorption glue nail. This time, there are only four screws, and the cable is still short. It is not enough to span an atx motherboard at all. Don't you know that the fan interface of the motherboard is often placed below, and the fan on the top of my chassis should be connected to the following. Do you know that if you don't know, you know now, Fortunately, the extension cord given by the buyer of the wind buckle used to be useful. Is this your prediction? Niubi. Speaking of the fan itself, it's still quiet enough. Anyway, I only use 1000~1300~. I can feel a little wind pressure through a layer of dust screen, which is not bad