The chassis is very beautiful, the quality is also very good, the workmanship is very fine, the material is very good, the material is thick, super heavy, super large,The design is good. The internal space layout should be adjusted. The optical drive bit does not need to take up space. There should not be two. The hard disk bit should be removable. It should give more space to the motherboard and the video card. Now the video cards are very long and need some space. The hinge connectors of the baffles on both sides are double buckles. As a result, they have to be made into single buckles. I don't care about the cost saving.
Two parallel ARGB light strips extend from the upper panel of the chassis to the front panel. The bottom ARGB light effect is set off against each other and reflected on the aluminum handle, making the whole machine show a cool visual effect.It can realize three different system installation modes: forward, vertical air duct (90 degree rotation) and inverted (180 degree rotation). It fully supports customization, and can extract the main board bracket, greatly improving the system installation efficiency and enjoying the fun of installation.
Extremely satisfied with the overall chassis. However, we opened the package with great enthusiasm and found that there was no screw ingredient package!The wires that should have been neat are in a mess! What is this?
Internal space: large enough with enough space layout Workmanship quality: very poor, solid surface, otherwise 1. The outer layer is generally loose, and the sliding doors on both sides are easy to trip, especially the plastic shell on the tail is loose, which absorbs iron stone chicken ribs. The magnetic force is too small. 2. The screws are extremely cumbersome, and should be used conveniently. The screws should be uniformly classified, firm, and easy to disassemble. 3 There is an optical drive position. The optical drive position, the top water cooling position, and the mechanical hard disk position cannot be used together. This is a bug. It is better to remove the optical drive position. 4. The handrail steel frame is the strongestComments on many 5 wires, which are not suitable for wiring, should be reasonably planned in the design. 6 graphics card positions, rear plate and frame conflict. Screws are extremely difficult to use. 7 mechanical hard disk positions can only be screwed manually or obliquely with a screwdriver. Most of them are good, but they are designed to look good on the hanging side, not good for use, not good for stability Heat dissipation effect: very good Appearance: very good, but mixed with a lot of plastic materials is not recommended Product packaging: general Conclusion There are many uses of optimization space, which is not worth more than 3500. This price is a fact
This chassis needs to be upgraded. There are still many unsatisfactory aspects in the internal structure design.The front fan bracket cannot be moved up and down. The standard configuration lacks the bottom fan bracket. It would be better if the fully perforated partition of the power supply compartment was made into a segmented type. It is also inconvenient to manage the wiring.
The chassis is very heavy, and it is difficult to move it by one person. The interior space is very large. Don't worry about the size of other parts. The heat dissipation effect is also good. The lighting effect is good, but the front panel cannot be closed. There are a lot of screw holes on the bracket, which is convenient for diy assembly, but 90% of the screw holes are not tapped, so we once planned to return them!!!
Five years after they came out, the design is still timely.Although there are some minor scratches, it is harmless.Should be able to use it all the time!
The chassis is quite heavy, and it's hard to lift it alone;Extremely good workmanship, high expandability, and will not be outdated in the next five years
Kuleng Supreme C700M full tower computer case has large internal space and high playability. The appearance is grand and the appearance is extremely high. The workmanship can only be described as ordinary. There is a deviation in the screw hole position. It is not easy to screw a screw!
The materials are solid, the space is large, and the advantages are not mentioned.Disadvantages: the foundry's quality control is not strict, and there are too many small defects. It is supposed that the details of such an expensive case are handled very well. The light adjustment button does not spring back or does not spring back, the extension line of the graphics card has obvious man-made scratches, the metal handle at the top of the case has a small missing corner at the end, the gap between the acrylic module and the module is large, and some parts of the case are not painted smooth or have paint falling off,Most of the screws will lose paint and iron filings when they are screwed, and the removal of the panels on both sides will rub off the paint on the buckle.
This case is really super large, very easy to use, the color is also very good, much better than the one I bought before, and also very affordable.The key is that it's too heavy. I carried it home and asked my colleagues to help me. It's really too heavy
The chassis is very nice. I look forward to the perfect installation. Internal space: very large Workmanship quality: very good Heat dissipation effect: very good Appearance: good looking Product packaging: very good
The appearance and expandability of this box are first-rate, but the installation is too complicated. You need to tighten the screws for everything. Many screws need to be tightened. The screws are not very solid.The previous design of screw free hard disk is nothing but food.Beautiful appearance, poor workmanship of parts