A major feature of the Patriot Moonlight Box T20 dazzle version is that the front can be equipped with 360mm water-cooled radiators or three fans, the top two fans, and the rear one fan, which can greatly increase the air inlet and outlet volume inside the chassis. Of course, no water-cooled cooling is used, but only six fans are enough. Even if a 350mm video card is installed, the heat generated by six fans is enough to hold. Other small details such as: the top fan position and the outside of the bottom power supply area are equipped with a magnetic suction detachable dust-proof screen, which saves a lot of time for cleaning. The LED backlight has a separate switch control on the chassis, which is simple and convenient to operate. This LED light effect is the favorite of the Patriot Moonlight Box T20 dazzle version, and the internal light can be seen at a glance. It's amazing!Finally, it is worth mentioning that the two RGB aurora illusory fans are conscience configuration.
Most dissatisfied
The design is relatively mainstream, and the appearance of the edges and corners of the side frame is not innovative. Because the chassis is made of pure white shell, the design is close to the Nordic style, so if it is placed at home, I think the home decoration will be better if it is European style. Of course, if this is not a disadvantage, then the interface,I think it is insufficient: there are only two USB3.0 interfaces on the front of the top of the chassis, so it is hard to copy the mobile hard disk or use multiple USB data transmission devices at the same time.
summary
In general, the internal hardware layout of this Patriot's Moonlight Treasure Box T20 dazzle version chassis is biased towards the mainstream design, and the installation positions of each hard disk are relatively reasonable without particularly awkward design, especially the LED backlight is almost at a glance. Six fans can effectively control the internal temperature of the chassis. Even with a high core configuration, the fans can be removed and installed with water cooling,So compared with the traditional chassis, this T20 is more considerate. In terms of appearance design, the traditional modeling lacks a sense of artistic design.
The overall machine is very beautiful. The workmanship and plates are quite honest. The detail treatment is also quite up to standard. In addition to the cool light pollution, it is a very good chassis.
Most dissatisfied
The weight of 8mm thick plate is slightly heavier due to support
summary
The overall panel is very thick, the layout and IO interface are reasonable, plus the transparent glass side panel and RGB light effect, it is really a very beautiful chassis, plus the details of long press to turn off the light effect, it is very good overall.
Tempered glass side transparent, 0.8mm thick hardware, multiple dust-proof, large space diy, white appearance with RGB light, beautiful~~~
Most dissatisfied
The design of the rear buttocks is not good looking, it's peaceful, it's not misplaced, the price of 400 yuan is a little expensive
summary
The appearance is very good, and other hardware aspects are also very powerful. It is not afraid to install water cooling and air cooling with RGB fans. Where is the Patriot brand? It is also worth buying a nice case for 399.
1. It is light, fashionable and beautiful both in appearance and volume. 2. The heat dissipation function of the chassis is very good, and you won't get stuck playing games. 3. It is designed to be dust-proof and silent, and there is no noise affecting people at night. 4. All kinds of humanized design, game startup, light projection, echo the sense of game competition ceremony.
Most dissatisfied
1. The design should be more optimized.
summary
In general, the Patriot Moonlight Box is a case competing with the game. The design conforms to the humanization, with good heat dissipation function, and the game is very smooth.
The quality of the board is good, and the back line is convenient to walk. With the Patriot E-sports 600 power supply, the CPU power supply line is a little tight, and other things are OK.I went to the radiator with the capacity of less than 170 at the beginning.The coolest MA610P can finally be stuffed in.Quite satisfied overall. It would be perfect if the RGB control of the motherboard could be connected again
Most dissatisfied
The later IO position design is unreasonable, which is slightly thin.There should be no gaps in some places.There was no problem with the installation, but I felt that this should not happen.At the beginning, only the first part of the side lights at the bottom could light up. I thought it was a hit. After two days, it would be normal. I don't know what the devil is!
summary
The details still need to be improved. Generally speaking, the cost performance is considerable
I really think it's pretty good. Let's evaluate. First, the chassis is much better than the dazzle black. It's worth replacing USB3.0 has two sockets and the black extension cable is not needed. It feels more beautiful than the extension cable. When a copper pillar is installed in the lower left corner, the hand will be useless. The screwdriver is too short. There is no way to choose where to start. It will be cut by the chassis and then screwed on by hand. In addition, the front panel does not have many air inlets and the video card bracket is real garbage. Don't expect it to be useful
The case is really big and beautiful, the black one is very durable, and the steel plate and glass are very good, so the installation will look good and practical
Overall, it's pretty good. What's worse is that the fan also chooses Patriot. Why can't the LED controller of the IO panel expand to support its own fan
The original case used by Kyushu Fengshen is heavier and larger than the current patriot's case. The case is beautiful and inexpensive. The price performance ratio is very high. The effect of my pirate ship keyboard and a set of lights factory of Thundersnake is very good!I think the price of the chassis is 2 to 3 hundred. I really don't need to buy thousands for faith
The light bar is not in good contact. It turns on and off. It is found that the front panel control light bar's circuit board pin is faulty soldered. Contact customer service to solve the problem quickly and promise to reissue a circuit board
The materials are sufficient and the workmanship is OK. The main thing is to sell lights.The chassis is slender, taller than the previous fan, but not as wide as the fan.I felt that the wiring was OK. The CPU power cord was not that long, so I had to pull it down when I couldn't get around.A small modification was made and a baffle was added.It looks much more beautiful, otherwise it's a big hole.
First of all, the lights are invincible at the same price, and even can be hung by leaps and bounds. The space of the box is very sufficient. I can also leave enough water cooling space in the ATX board.The plate is very thick and hard, which is heinous, but this hardness also has disadvantages Figure 2 is a problem with the chassis. The interface is very small. I use the ASUS b450 f gating. The integrated interface guard cannot be plugged in. There are three protruding iron pads under the chassis. At this time, the use of enough materials is bad. I broke the three places for an hour before plugging them in. There is also a small problem that the atx board needs to be copper padded, which is very, very difficult to screw in.
The appearance of the chassis is very high. It's just that the motherboard is a little bit # installed. You said that you had nothing to do with the motherboard rivet when leaving the factory. You know what type of motherboard the customer is, and it's hard to remove it if it is too tight without putting any oil on it. The nails and control quality are too poor, so it's easy to break the slide wire. The motherboard interface backplane is hairy and there is a distance between the chassis and the motherboard.If the front panel is equipped with a fan, it can only absorb air, and the air inlet is too small, only up and down.
The chassis is much larger than expected, and it is very heavy. The fan is installed as standard, and the power can be connected to the large 4pin interface of the power supply. When I did it myself, I found that the cable of my power box was not long enough, which * * was very embarrassing
Very strong boards are not very thin. The appearance is OK, and there are many additional functions.Try installing the machine tomorrow. I don't know how the light effect is, purple potato pudding....
Installing the mainframe can't save the chassis and power. At the beginning, it's hard to remove a cheap baffle. The specification is not up to standard.Hurry to change the chassis. The fan has been installed and the cables are tied. It's much more comfortable.