It is used in the interstellar snail C chassis for heat dissipation, and the size is just arranged to die, which is considered to reach the upper limit of the motherboard height of the chassis.The temperature of the current climate is very low. I look forward to seeing the effect in summer.
There is no doubt that the small chassis is the most inexpensive and high-quality solution with the HP 400s of Joshberg. The height is low enough, and the chassis is equipped with narrow strips, no wind shield and no roof. The sound of the fan is also very small, which is basically perfect.
The first texture of the hp400s is certainly not as good as that of the hx4170d, but every price is worth every purchase. As a 36mm downward pressure radiator, it has no problem pressing the 4790. The noise control is good, much better than that of the 4170d. Generally speaking, the price of the radiator is acceptable
I assembled a small mainframe for my girlfriend while taking advantage of the Double 11. I saw some of the recommended heat sinks. The size is appropriate. The temperature of the toaster is about 60 degrees, 12100F. I hope they can last longer.
The fan mute effect is very good, and the CPU heat dissipation is also very powerful. It is just a little troublesome to use and install the ITX motherboard, which is generally praised
Heat dissipation effect: the small fan is very powerful, the wind is strong, and the pressure of 10100 is more than enough Air volume and wind force: the wind force is strong, the workmanship is exquisite and heavy Mute effect: there is still sound at full speed, which is acceptable. After all, I am a T40 chassis Convenient installation: backboard installation, good comments on plastic gasket
I haven't tried it yet. I wonder if the cooling effect is good.Let's wait until we have tried.It seems that the radiator is very beautiful and should perform well in the ITX case.
Actual height 27mm, 4pin connector.The lower screw is not very easy to screw. It needs to be placed in the front first, with the screw mouth aligned, and blind the screw on the lower part. Do not screw on the screw until all four screws are screwed on a little, but not all.
I found this fan according to the online strategy. In order to match my small chassis, the price is acceptable. This batch of fans has a stable price, and no pictures were taken after the packaging was thrown away. At present, they are in good use.The accessories are complete, and they should be installed according to the instructions,
Extremely good. I bought it after shopping around three stores. The owner of the store was very good. He answered the questions patiently and in detail. He will come again if necessary.Very good cooling effect, quite quiet, very simple installation, very satisfied in general
Garbage. The design is unreasonable. When it is installed, the CPU cannot be plugged in for power supply.Since there is no return, I will give dozens of yuan to * * to take medicine
Very good radiator, super mini.The cabinet is just fine. The pressure is 10105. The temperature will be a little high, but there is no way to avoid it. The cabinet is too small and the air duct is not good.It's still OK to recommend
The old computer was upgraded and the CPU heat sink was replaced.The heat dissipation effect is very good. The fan of the radiator works well. Other noises are not heard. The radiator is thin and suitable for small chassis. Overall, it is good.
It is planned to install an itx host. The appearance of the overclocking three hummingbird chassis is very high, but it cannot install a large cpu heat sink.I compared several small downforce fans on the Internet. They all said that this fan has low sound and strong wind power. The i5-12400 pressure is enough, and the price is acceptable. I will install it tomorrow to see the effect.Very high appearance, simple and elegant.