1. Main operating indicators: The opening water level is 10-30 higher than the top of the gateCM Return valve water level 0.7-0.8 valve height The normal water retaining level is equal to or slightly lower than the elevation of the gate top It can be synchronized or continuously overturned and reset in a short time. 2. Schematic diagram of action principle: ① In flood season, when the water level at the top of the gate reaches 10-30cm, the door panel starts to start. ② The flap door starts to start. ③ With the increase of flood volume, the discharge area of the flap door will increase until it is completely overturned for flood discharge. ④ As the flood water level drops, the overflow area of the flap door automatically decreases, and then the water retaining is reset to restore the water storage level to the start state.(As shown in the figure)
3. Product specifications
model
project
MV-10
MV-12
MV-15
MV-17
MV-20
MV-25
oneHeight of flap door
1.0m
1.2m
1.5m
1.7m
2.0m
2.5m
twoSingle hole length of flap door
5m
6m
5m
6m
6m
6m
6m
6m
threeDam crest * small width
2m
2m
2m
2m
2.5m
3m
3.5m
4.5m
model
project
MV-30
MV-35
MV-40
MV-45
MV-50
MV-60
oneHeight of flap door
3.0m
3.5m
4.0m
4.5m
5.0m
6.0m
twoSingle hole length of flap door
6m
6.6m
8m
8m
9m
10m
8m
threeDam crest * small width
5.1m
5.1m
5.7m
5.8m
6.4m
10m
9.5m
Door height3MThe width of a single leaf is6M;Door height greater than3M, the width of a single leaf is:8M、9M、10M。In addition to the above specifications and models, other sizes of hydraulic automatic flap gate and hydraulic dual control flap gate can also be designed according to user requirements.
Business card
Quzhou Hesheng Hydraulic Automatic Control Flap Door Co., Ltd