Let your computer perform more than 100%. Collect it quickly!

preface:

I wonder if you have noticed that the price of computer hardware has soared in recent years. As consumers, we should pay more attention to find the cost performance ratio and quality price ratio when shopping. After we buy it, we should try to enjoy all the performance of computer hardware, so that we can get value for money. But for many computer editors, It seems that this goal can be achieved by completing the computer hardware assembly and installing the drivers. In fact, there are many good software for the motherboard and graphics card hardware manufacturers to start and try. With them, you can fully activate the full performance of the computer hardware, and some can also improve the performance. Today, Lu will come to science popularization to operate these hardware.

Tutorial hardware recommendations:

I5 14600KF, 14 cores, 20 threads, 10nm process, maximum Rui frequency 5.3GHz, L2 cache 20MB, L3 cache 24MB, thermal design power consumption 125W, maximum acceleration power consumption 181W.

The main board of the test platform uses MSI Z790 MPOWER, which is known as an overclocking artifact. For many users who like DIY, they will not be disappointed if they choose it.

The MATX board type, I wonder if the designer has seen that this type of board type has been sold very well in recent years. After all, it can reduce the size while giving consideration to a certain degree of expansion.

The area of power supply and heat dissipation metal module is not small, which plays a good role in passive heat dissipation of CPU power supply and heat dissipation. In the appearance, the designer uses metal wire drawing+frosting mix and match, printed with timing, external frequency, clock frequency, clock, voltage and other over frequency adjustment elements, which is full of players!

Since the positioning is over frequency, the CPU power supply materials must be supplied. The main board adopts the 12+1+1 phase scheme.

Among them, Route 12+1 is Renesa RAA220075R0 75A DrMOS+1-way MPS MP87670.

The P I M of the motherboard is RAA229132 of Renesa, which supports up to 8+1 phase output. But how does the motherboard come from 12+1 phase? Obviously, the strategy is 6x2 phase parallel connection.

As a motherboard with overclocking as its orientation, overclocking needs to be carried out in all directions. Even processors that encounter non K suffix lock frequency multiplication need to improve the performance of players through overclocking. All this is achieved by the motherboard The external clock generator Renesa RC26008 is given the domineering name by MSI: OC Engine.

In addition to overclocking the CPU, memory overclocking is also necessary. MSI Z790MPOWER supports 64GB of memory by default for the maximum capacity of a single slot, 128GB for dual slots, and 8000MHz+for memory frequency.

The overclocking element marks the metal heat sink that fills the whole motherboard.

M. 2 The hard disk adopts the tool free fixing design, and the first channel of the PCIe 5.0 × 16 slot adopts the metal reinforcement treatment to deal with the overweight graphics card.

Ruiyu ALCE897 audio chip supports 7.1 channels and Audio Boost5 technology. The sound card is also surrounded by Nikon audio filter capacitor and anti-interference audio circuit.

Close up of Ruiyu RTL8125BG 2.5G wired network card chip.

Configuration of rear IO interface: 4 * USB 2.0, DP+HDMI, 3 * USB 10Gbps, Type-C (20Gbps) T, 2.5G rate RJ45 wired network card, WIFI 6E wireless network interface, 7.1 audio interface and coaxial optical audio interface.

As one of the main equipment of this tutorial, the memory I use is Kingston Renegade Rebel Hacker Divine Bar DDR5 7600MHz 16G * 2. This product series has 6000-7600MHz frequency options to meet different needs of users. It supports the XMP3.0 specification, CL38 low timing, silver black aluminum vest looks very beautiful, and can bring good heat dissipation effect to memory particles. On chip ECC and on-board PMIC provide better stability. Two independent 32-bit channels can significantly improve the data efficiency of multi-core processors. In addition, Kingston, as the world's leading storage manufacturer, Its storage products have been rigorously tested and certified by the world's leading motherboard manufacturers, with better compatibility.

In terms of power supply for the test platform, MSI MAG A850GL PCIE5 is used, which conforms to the 80PLUS gold medal certification, full module interface design, full bridge LCC resonance and DC-DC structure. It natively supports ATX 3.0 specification and PCIe5.0 power supply (12VHPWR interface), and can deliver up to 450W power to the video card.

XMP：

You should know that the memory frequency is 4800MHz or 5600MHz by default, which is far from the nominal high frequency. At this time, you need to turn on the XMP switch in the BIOS. Generally, manufacturers will make this button more obvious. What you need to know is that the XMP preset file generally has 2-3 gears, and the highest is the memory frequency you choose. Performance comparison before and after XMP:

By default, the read-write and replication of 4800MHz and 7600MHz frequency memory are significantly different. It is necessary to open the memory XMP. Of course, if you are an AMD Reelung 7000 user, you can open EXPO. The principle is the same as that of Intel's XMP.

Before and after XMP is enabled, the CPU single core performance differs by 3%, and the multi-core performance differs by 4%.

Memoy Try it！

I have to say that the increase of memory frequency is of great benefit to the computer performance. If you want to overclock the memory, you have to recommend MSI's Memory Try it! Function, it can automatically identify the memory particles you use, so as to give the optimal small parameter timing of the corresponding frequency, greatly saving the time for users to adjust themselves.

0x123 Close CEP with microcode

The default roast chicken temperature CPU temperature is up to 91 ℃, and the CPU power consumption is 175W.

After the 0X123 microcode is enabled, the CPU full load temperature drops to 74 ℃ and the power consumption drops to 143W. For 13-14 generation Core with K suffix processor users, high temperature and high power consumption at full load must be a bit unbearable. Turning off CEP with 0x123 microcode can significantly reduce CPU full load power consumption and temperature, and reducing temperature has many benefits for hardware service life and status. The specific tutorial is introduced in my previous articles, and will not be detailed here.

GAME BOOST:

The unique function of the MSI motherboard can be turned on with one click in the upper right corner of the BIOS.

After opening, save and exit the BIOS. You can see that the motherboard can help you adjust many parameters by default, mainly in terms of CPU.

It can be seen that after GAME BOOST is enabled, the maximum CPU frequency is increased from 5.3GHz to 5.4GHz, and the single core/multi-core performance is increased by about 2.4% compared with the default frequency. The specific frequency increase will be determined by the CPU cooling conditions and CPU constitution.

CINBENCH R23's multi-core score increased by 3.7%, and the single core score increased by 2.1%.

Fan speed adjustment:

Now it's summer. If you want to give better play to the performance of your computer, you must do a good job in heat dissipation, which is crucial for the adjustment of CPU fans and chassis fans. You can enter the fan information in the BIOS to adjust, including the mode of the fan speed PWM/DC, and the curve adjustment of the fan speed and CPU temperature, which can be set according to your own preferences. It is very user-friendly.

Summary:

The above is just a drop in the bucket of computer performance improvement skills. Next time, Ah Lu will introduce more useful hardware operations, so that your computer is worth the money. Thank you for reading the full text, and welcome to praise.