CS 2 finally came, and the host shared by 13600KF+TUF B760M+4060 sea view room

1、 Preface

In the early morning of the National Day holiday steam , suddenly found in the list《 CS : GO becomes CS 2.

Staring at the familiar and unfamiliar game interface, for a moment, the scene of playing CS, Red Alert 2 and Big Pineapple 2 in Internet cafes when skipping classes came to mind

I still vaguely remember that the mainstream configuration at that time was Ben San and poisonous dragons. The configuration of playing CS was not even given to the exclusive display, and the centralized display went straight... Twenty years later, the development of computers has long been different from that of that year. My computer has also undergone changes, and always maintains the latest platform.

However, it is easy to configure and hard to return to youth. Those people, things and the feeling of playing games all night in those years are gone.

In fact, since the birth of the baby, he has basically stopped playing games. In recent years, he has maintained his interest in the game circle because of his love of hardware. Only a few games can arouse my dusty memories and make me feel the urge to play occasionally.

Among them, the big pineapple 2 is one, so when the big pineapple 2 remake came out, I started to experience it at the first time.

Then CS is the second paragraph.

Therefore, this sea view room host is equipped for CS 2.

2、 Configuration scheme introduction

Because the configuration requirements of online CS2 2 are not very high, this configuration does not blindly pursue high-end, but mainly focuses on practical mid end configuration, as shown below:

CPU On the other hand, I chose the i5 13600KF. After seeing the specifications of the 14 generation i5 14600K (F) published on the Internet, I decided to continue using the i5 13600KF. The less 0.2GHz Remax, is it not good for me?

a main board On the other hand, in view of the fact that the K series U is incinerated when it leaves the factory, the overclocking is not much, so the B760 is equipped with a higher cost performance. Of course, the voltage and temperature of the K series U with the B760 are relatively high, but there is a solution at present. The specific method is at the end of the article. Users who need it can see it.

The motherboard uses ASUS TUF GAMING B760M-PLUS WIFI heavy shooter, this motherboard has rich functions and solid power supply, and even if it is matched with a high-order CPU, there is no pressure. It has a good reputation among many B760 motherboards.

The back of the outer package of the motherboard is at a glance.

The accessories of the motherboard are also rich.

The appearance style of the motherboard is basically similar to that of the previous generation B660M heavy gunner, but many functions have been enhanced, such as heat dissipation, power supply, materials, etc.

The I/O+VRM area of the motherboard is equipped with super large aluminum alloy heat dissipation armor, and its interior is equipped with high-quality heat conductive patches, which can greatly improve the heat dissipation efficiency and ensure the stability of the motherboard during operation.

The motherboard adopts 8+4pin power supply interface and ProCool solid pin design, which has the advantages of high strength and low impedance.

Compared with B660, the design of 12+1 power supply module, TUF inductance, TUF capacitor and integrated Dr MOS is still standard configuration.

Power supply PWM is still a classic DIGI+EPU ASP2100 digital control chip, and MOSFET is Anson Beautiful NCP 302150， The single tube can withstand 50A current.

Memory In terms of sockets, it is equipped with four DDR5 memory sockets, which support AEMP II technology, and the frequency can reach up to 7200MHz+(OC).

Two 5V RGB interfaces are provided on the lower right side of the memory socket. In addition, one 5V RGB interface and one 12V RGB interface are located at the bottom of the motherboard. It can be seen that the light interface configuration of the motherboard is relatively powerful, and it is basically the same as the high-end Z-series motherboard.

The motherboard provides one set of USB 3.2 front interface and one USB 3.2 Gen1 Type-C front interface, of which the USB 3.2 Gen1 Type-C interface adopts the metal reinforcement design.

The motherboard provides one PCIe 5.0 × 16 slot, which adopts the SafeSlot high-strength design, and can effectively prevent damage caused by some players' efforts to work miracles. The motherboard also provides one PCIe 4.0 × 16 slot (supporting × 4 mode) and one PCIe 3.0 × 1 slot.

The motherboard provides two PCIe 4.0 M.2 slots, which are designed with convenient snaps, and are equipped with heat sinks as standard.

The motherboard is equipped with four SATA 6Gbps interfaces as standard, two of which are vertical and two are horizontal.

There are also some interfaces at the bottom of the motherboard, such as Thunderbolt (USB4), fan interface and RGB interface.

In terms of network, the motherboard adopts RTL 8125BG 2.5Gb cable network card +AX201 WiFi 6 wireless network adapter In combination with ASUS's exclusive AI intelligent network technology, players can experience higher network transmission speed and lower network delay.

In terms of audio, the motherboard uses Realtek ALC897 sound card chip supports 7.1 channel output. At the same time, the addition of special audio capacitor and SupermeFX audio protection line provides hardware guarantee for high-quality sound effects. In addition, the motherboard supports two-way AI noise reduction technology, which can reduce the ambient noise of microphone input and audio output, thus greatly improving the player's sound experience.

The I/O bezel adopts an integrated design, and the number of interfaces is relatively rich. In addition to the commonly used DP, HDMI, USB, and audio interfaces, it also provides USB 3.2 Gen 2x2 Type-C interface, 2.5G wired network interface, WiFi 6 antenna and other interfaces.

The motherboard adopts a 6-layer PCB design, which has a very good stable performance with the help of the esporting agent's guard technology.

In terms of memory, considering the positioning of this host, RGB, which has little effect on the performance bonus, is abandoned between performance and RGB, and the high-frequency strip, New Lexus, is selected instead Crazy blade Soldier DDR5 7200 16GB × 2.

The memory adopts plastic packaging, which focuses on a high cost performance ratio.

Back view.

The memory adopts a black aluminum vest design, which, together with the internal heat dissipation silicone, can bring very efficient heat dissipation performance.

Close up, the heat sink of the memory is simple, but the texture is very good.

At a glance at the back of the memory.

A close-up of the sticker. The memory adopts a single 16GB specification, and the working voltage is 1.40V. The memory supports Intel XMP 3.0 technology. After being turned on, the frequency can reach 7200MHz (CL 34-45-45-115).

Memory shoulder view.

Hynix's original A-DIE particles (and some M-DIE particles) are selected as the memory, and solid workmanship ensures the performance and stability.

In terms of graphics cards, considering that the RTX3060 on Steam has just taken the top position, it is not too radical in terms of graphics cards this time, and has chosen the middle end RTX4060. Although the graphics card was badly sprayed by players before, it is still very fragrant after the recent price reduction.

Video card is IMC RTX 4060 Metal Master OC, this graphics card adopts NVIDIA Ada Lovelace architecture, supports optical pursuit and DLSS 3 technology, has very good game performance, and also has good performance in AI and productivity creation.

The graphics card adopts the mechanical style of packaging, which is in line with its name of "metal master".

See the back of the outer package.

List of annexes.

The graphics card is made of all metal shell, which makes it feel very good when held in hand; Since the RTX 4060 has a small heat output, the graphics card adopts a dual fan design, which ensures good compatibility. It is also easy to use it to build some mini steel cannons.

The shoulders are also made of pure metal and have a matte design.

The graphics card adopts 8pin power supply interface.

The graphics card adopts the design of all metal clad shell, but there are heat dissipation holes in some places, as shown in the figure below.

The back plate is also made of pure metal.

The end of the backplane also has a heat dissipation window design.

The I/O interface also adopts the thermal opening design, and the video output interface is equipped with three DP 1.4 and one HDMI 2.1.

In terms of SSDs, the price of SSDs has plummeted a while ago. Although it has rebounded recently, the price is still at a low level, and soon it will be the Double 11, so you can sit tight.

Here you choose Kingston FURY Renegade 1TB， It was chosen mainly because of its flagship performance. It can greatly save time and improve efficiency whether it is game graphics or video clips.

The outer package of SSD is simple, but this kind of cardboard packaging has high anti-counterfeiting performance.

See the back of the package.

List of internal accessories.

SSD front view.

The SSD adopts the group PS5018-E18 master+self sealing 3D TLC NAND scheme, and then uses graphene aluminum alloy patches on the surface to assist in heat dissipation.

SSD adopts M.2 interface and supports NVMe 1.4 technology.

At a glance, the back of the SSD is a component free design.

Jiuzhou Fengshen PX850G is selected as the power supply. The power supply is designed with a rated power of 850W, and supports ATX3.0 specification and PCIE5.0 native power supply. At the same time, it has solid workmanship and an extremely long warranty period (10 years). It is also a class with very strong comprehensive strength in high-end power supply, and I think it is very suitable for high-end players who pursue quality.

Front view of power supply outer package.

See the back of the power supply outer package.

List of accessories, including instructions, quality assurance cards, 24pin short connectors, screws, power cables, module cables and ties.

The module lines are abundant, and the number can meet the needs of various high-end platforms.

The power supply provides a native 12VHPWR 16pin wire, and adopts a 600W high specification design, which can meet the power supply requirements of high-end graphics cards.

At a glance, it can be seen that the power supply adopts a full black appearance design, and the 16cm length design is not long, which can provide good chassis compatibility; Its topology adopts the classic LLC resonance+DC to DC structure, with high conversion efficiency. With the use of all Japanese electrolytic capacitors, its stability is also guaranteed.

There is only a new version of Kyushu LOGO on the side, which looks very simple.

The number of module interfaces is also abundant, and 12VHPWR interface is equipped.

From the nameplate list, it can be seen that the power supply has passed the 80PLUS gold medal certification, and the 12V output is up to 849.6W, accounting for a very high proportion.

At the AC input end, the power supply provides an AC switch and an ECO switch. When the ECO switch pops up, the low load fan stall mode can be started. With the internal 135mm FDB fan, the noise can be greatly reduced.

As a struggling party, the consumption of silicone grease is also relatively fast. In order to save time, five Jiuzhou Fengshen DM9 master level thermal conductive silicone grease were obtained at one time. This silicone grease not only has good heat dissipation effect, but also is very easy to apply. No matter you use the six point, nine point or other positions, it is easy to be flattened by the radiator, which is very convenient for installers, The installation efficiency is greatly improved.

In line, Kong Yiji felt that he was rich.

The list of accessories also provides a cleaning bag and silicone grease scraper, which is convenient for players to operate.

Overview of silicone grease body.

The heat sink adopts the Josep TG-240. In fact, the chassis supports two cooling modes, air cooling and water cooling. However, considering that the air duct of the chassis is vertical from top to bottom, the integrated water cooling effect is better.

The external package of the radiator is at a glance. The front of the radiator is printed with the working effect picture of the radiator, which is simple, intuitive and cool.

Its specifications and parameters are introduced on the back.

The attachments are rich, and the fasteners provide support for I and A platforms.

The radiator adopts a black appearance design, which is relatively calm and atmospheric. Two ARGB fans have been pre installed on its cold exhaust.

The cold head shell is designed with skin like material, which feels good. The top cover nameplate is designed with damping rotation, which is convenient for players to adjust the direction, so that the LOGO is always in the right position.

High performance cold head design is adopted for water cooling, which can provide excellent heat dissipation efficiency with a large area of slightly convex pure copper base.

The radiator adopts a 240 cold drain design, and the 12 high-performance water channels inside can further improve the heat exchange efficiency.

The radiator is equipped with two 12CM PWM ARGB fans as standard, which can give consideration to both performance and light efficiency. The hidden wire design is used between the fans, which can further simplify the wire and facilitate wire management.

The chassis uses the Joshberg TK-1 Starship Cabin. The chassis adopts the hyperbolic side transparent glass design, supports the MATX motherboard, supports the 240 cold exhaust, and has very high playability.

The chassis is packaged in a simple and environment-friendly kraft paper box.

Back view.

At a glance, the main feature of the chassis is that it adopts the 2.5 side round view design of double bent annular glass, and can see the accessories in the chassis from three directions, which truly explains what is called a seascape room chassis.

I/O interface list, USB3.2 Gen2 Type-C interface is also arranged.

The other side is made of aluminum alloy side plate, and the opening design is adopted to facilitate the power supply to absorb air and form an air duct.

At a glance at the tail, it can be seen that the chassis adopts a dual compartment design, so the thickness is slightly thicker than the normal chassis.

The top of the chassis supports the installation of 240 cold exhaust, and has heat dissipation openings and dust screens.

The bottom of the chassis is designed with a large area of dust screen, where two 120 fans can be installed.

Remove the glass side panel to see the internal structure. It can be seen that the chassis is designed with M-ATX structure, and the air duct is vertical from top to bottom.

However, the internal space of the chassis is relatively compact, so you should pay attention to the length of the video card (limited to 28cm) when installing it.

Since the power supply compartment is located at the back, the space depth of the back is large, which is convenient for players to manage and hide lines.

The chassis is also equipped with a hard disk cage, which can support two 3.5-inch hard disks or one 3.5-inch hard disk+one 2.5-inch hard disk.

The fan selects the JOSIBER ZH-120 reverse fan. In addition to supporting reverse rotation, the fan also supports wire free splicing, which can splice multiple fans together like building blocks. In addition, its side&axis also supports a thousand layer mirror light effect, which is highly playable.

Front view of fan outer package.

Overview of the back of the fan outer package.

List of accessories. In addition to 3 fans, fixed screws and adapter cables are also provided.

I chose the black reverse version. It can be seen from the fan blades that, unlike most fans in daily life, they rotate counterclockwise. This fan rotates clockwise.

In addition, the axial position of the fan supports the 1000 layer mirror light effect after being powered on, and the effect is very cool.

Overview of the back of the fan.

The side of the fan also supports the 1000 layer mirror lighting effect.

The four corners of the fan are designed with shock absorption pads, which can effectively reduce resonance and noise.

The fan adopts a magic interface, which supports wire free splicing, greatly reducing the difficulty of line management.

The assembly is really simple. Just align the bayonet and lock it.

3、 Installation and lighting display

Although the case of Josep TK-1 is relatively compact in space, it is not difficult to install it, so it is easy to install it.

The "strategic depth" of the back is relatively large, so line management is also very easy.

If the curved glass is covered, the effect is good, right?

Look at it from another angle.

Although my attitude towards light pollution is optional, some players can't stand it, so here are some light effect pictures by the way.

Overall effect.

Cold head lamp effect.

The thousand layer mirror on the side of the fan also works well.

Try plain white again.

4、 Test experience

First, take a look at the screenshot of CPU-Z. The CPU, motherboard, memory and other hardware information can be viewed here.

In the CPU-Z benchmark test, the performance of single core 828.1 and multi-core 9802.0 is very close to the flagship i9 12900K of the previous generation.

CINEBENCH R23 benchmark test, in this test, i5 13600KF is also the i7 12700KF of the previous generation.

AIDA64 cache&memory performance test, thanks to the addition of 7200MHz high-frequency memory, the memory read, write and copy speeds are all Breach 100GB/s has been reached.

Then look at the graphics performance and the list of GPU-Z specifications.

Go straight to CS 2.

From the test results, there is no pressure to play CS 2 with this configuration. Even if the high resolution is enabled, the frame rate is very impressive. Players can choose high scores or high screen swiping with confidence.

The tests of other games will not be screenshots one by one, but will be summarized directly.

It can be seen that this platform is competent for 2K resolution high effect online games and various 3A masterpieces.

CPU baking machine test (room temperature 20.5 ℃): AIDA64 single hook FPU baking machine is used for 10 minutes. The score of the first 5 minutes is Clear, and then the average temperature between the 5th and 10th minutes is recorded.

It can be seen that the voltage and temperature of B760 with K series U (13600KF) are indeed on the high side. In the later stage of the toaster, the 5.1 GHz Rui frequency cannot be maintained, and the frequency reduction phenomenon occurs.

Can this problem be solved and how can it be solved? Please continue to look down.

Restart the computer, enter the BIOS setting interface on the motherboard, enter the Tweaker's Paradise sub item of Ai Tweaker, and then set the Switch Microcode to 0x104 microcode.

Then go back to the Ai Tweaker big item, set the Global Core SVID Voltage to Offset Mode, Offset Mode Sign to "-" mode, and Offset Voltage to 0.1V (this is set by everyone according to their own CPU conditions, and the more stable, the better).

Then set the CPU Load line Calibration (anti voltage drop curve), which should also be set according to your own CPU constitution. I set it as Level 1 here.

Then look at the baking machine. It can be seen that the temperature of the CPU core immediately dropped a lot. There were three core temperatures that had broken 100 before, but now they are all below 100 ℃. On average, the temperature of the core has dropped nearly 4 ℃.

Although the decrease is not very large, you should know that there is no frequency reduction in the toaster CPU this time, and the P core Rui frequency has been kept at 5.1GHz.

The GPU uses FurMark for baking (room temperature is the same as above). After the baking machine is stabilized, the maximum core temperature is 61 ℃, which is still very low.

In the power consumption test, the combination of i5 13600KF+RTX 4060 is relatively power saving, and the double baking is just over 400W. If you play CS 2, it will be even less.

5、 Summary

As the year of chasing the wind, we are now in middle age. It seems that those people, things and hobbies have become dusty for a long time, but some fragments will emerge when we dream back at a midnight. These fragments are enough to prove that some things have indeed happened, but we are no longer young.

However, compared with those middle-aged men who like stringing, fishing and flower growing, my hobbies seem to be a little younger. No matter how good or bad they are in the eyes of others, I think they are very good. Just like this host, it is also very good!

That's all right. I hope it can be helpful for you to configure the machine. Thank you for your appreciation!