computer Chassis As an important part of the computer, it plays a vital role in the heat dissipation, performance and stability of the computer, so you must choose a good chassis to assemble your own computer. For example, this Josep UMX6S is an upgraded version of Josep UMX6, which is a mid tower chassis. In fact, its delicate appearance continues the consistent design of Josep's series. If you like it, you can pay attention to it.

1、 Appearance design

The packaging of Josep UMX6S is not shown here, but directly from the appearance design of this chassis, it continues the style of this series, which is very simple and exquisite. Adopted 2.5T magnesium The aluminum alloy material makes the whole chassis look very textured.

Front interface includes USB 3.0, 2.0, audio interface, USB 3.2 Gen2 Type-C (10Gbps) interface Power Supply The switch is very convenient to use. The size of the chassis is 224 × 482 × 501mm, which is moderate and can be easily placed on the desktop.

Both sides of the chassis are glass panels, which are designed to be disassembled without tools and can be easily opened.

The four sides and two sides of the Joshberg UMX6S chassis are designed The ventilation holes are all equipped with dust screens to further improve the heat dissipation effect. Many players are worried that this design will be a big stuffy pot, but I feel it is very good when I actually use it. Of course, the premise is that your fan should be installed in place, ha ha.

The top of the Joshberg UMX6S is still equipped with a quick detachable dust-proof net, and this time a sliding mounting frame is also designed. In brief, the fixed frame for fixing the water cooling or fan is movable.

The nameplate and manual accessories on the rear of the chassis still use the UMX6 specification. I have to say that the rear of this chassis is still very beautiful. There are 8 PCIE mounting positions at the bottom, which is one more than the ordinary middle tower.

2、 Interior space

JOSEPER UMX6S supports E-ATX, ATX, M-ATX a main board , and 330mm can also be installed Graphics card And 169mm high air cooling radiator 。 The power supply of the chassis is front, and two 3.5-inch hard disk mounting positions are designed at the bottom.

Two fan mounting positions are supported at the bottom. It is suggested to use the reverse blade fan, for example, the ZG-120W fan I will introduce later.

The power supply compartment has large space and can support 200mm ATX power supply at most. But the fan is facing forward. I think it is OK to face the inside of the chassis. However, the fixing screw position of the power supply is fixed. I hope "Old Joe" can optimize this. In addition, the back of the motherboard can accommodate two 2.5-inch solid state drives.

The mounting bracket on the top is really convenient. I like it very much.

3、 Josep ZG-120 fan

JONSBO ZG-120W magic fan adopts pure white color matching. The fan has 9 blades, which are designed with reverse blades. It is perfect with this chassis. In the middle of the fan blade, there is a special axial thousand layer mirror design, and the outside is pasted with a protective film; The fan leaves are milky white, with frosted texture, and the soft light effect is very good; There is also a rubber shock pad design around the fan.

4Pin fan power supply line and 3Pin lamp efficiency power supply line are integrated, Two handlebars in parallel and three handlebars in parallel can be selected according to individual needs. This design will be vigorously promoted because it is really too convenient.

It is firm, so don't worry about falling off.

4、 Antioch NEO ECO1300M gold medal full module

The power supply comes from the ATX3.0 era new product of ATX3.0, NEO ECO1300M gold medal full module, which natively supports PCIe 5.0. There are three models of 850W, 1000W and 1300W, which are black and white. This time, the power supply directly rises to 1300W, which can be said that there is no need to worry about the power supply problem in a few years. Even if 5090Ti came, he didn't worry.

All Japanese capacitor, gold conversion efficiency, 10-year warranty, only replacement, support 100v-240v wide output, at the same time, in order to deal with higher power graphics cards in the future, the power supply also layout a full bridge circuit.

The specification size is 140cm X 150cm X 86cm, and the standard size of ATX3.0 power supply, so the installation environment will not be too strict. NEO ECO1300M Equipped with silent fan and FDB liquid bearing, it can keep low noise even under high load.

The power supply of ATX3.0 era can be said that the power supply of the native 12VHPWR graphics card is standard, and this power supply is no exception. It can be seen that all the interfaces are fully arranged, There are 6 PCI-E/CPU power supply interfaces.

5、 Icecube 620 intelligent digital display air cooling

Ice cube 620 Intelligent digital display air cooling can be regarded as an upgraded version of 620, Size is 129x138x162 mm ， It can be adapted to the host chassis with a heat dissipation limit of 162mm and above. The memory support is also very friendly. The maximum is 43mm (59mm is supported for replacing the fan position). his The new technology of air-cooled radiator developed by Kyushu Fengshen is adopted, which greatly improves the heat dissipation efficiency.

The fastener supports Intel's
LGA2066/2011v3/2011/1700/1200/1151/1150/1155 and AMD's AM4/AM5 platform.

Ice cube 620 uses a 12 cm diameter FDB bearing Silent fan, with closed airflow design,, When the rotating speed is 500~1850 RPM ± 10%, the air volume can reach 68.99 CFM and 2.19mmH2O air pressure, the fan noise is ≤ 28dB (A), and the rated current is 0.12A.

Officially, the CPU level supported by this radiator is Intel i7 Draconic R7， It supports the highest power consumption of 260W. Of course, the biggest feature is that it has a display screen that can display CPU temperature and utilization rate, etc.

6、 Installation experience

Status of power supply installation completion. The space reserved below is enough for wiring, but it is somewhat difficult to use a long power supply, so you must pay attention when purchasing power supplies.

Illumination status:

Effect display of Jiuzhou Fengshen Ice Cube 620 intelligent digital display air-cooled radiator:

The room temperature is 25 ℃. In daily standby, the processor temperature is only 39 ℃, the core temperature fluctuates around 38 ℃, and the power consumption is 25W.

The 5.0GHz single bake FPU has a processor power consumption of about 210W, and the overall temperature is 96 ℃. The package and core temperatures fluctuate around 96 ℃. There is no problem in daily use.

summary

In general, the Joshberg UMX6S is a very excellent middle tower chassis. It has exquisite appearance, rich interfaces, and reasonable internal structure. It also has excellent heat dissipation meter with a reverse blade fan. It is very suitable for users who need a middle tower chassis. At the same time, its scalability is also excellent, which can meet the needs of different users.