How strong is high-frequency DDR5 memory? Yingchi HOF Pro DDR5 7600 16G × 2 experience sharing

1、 Preface

Recently, with the popularity of Hynix A-DIE particles, it can play and super high frequency DDR5 Memory There are more and more, but the frequency of most models is still below 7000MHz. If players want a higher frequency, they can only choose to overclock themselves.

However, for players who are not keen on overclocking or who do not like tossing, there is another solution, that is, to directly purchase higher frequency memory. Although such a product will be more expensive, it is more convenient, and the parameters debugged by memory manufacturers are more stable than those of ordinary players. What we want to share today is just such a high frequency DDR5 memory - Yingchi HOF Pro DDR5 7600 16G × 2. In addition to the 7600MHz ultra-high frequency, this memory also follows the classic white appearance of HOF series. It has a very high appearance, and also supports RGB light effects, giving consideration to playability.

2、 Unpacking

The outer memory package retains the style of HOF series, which is extremely simple in white and looks grand and high-end.

See the back of the package.

There is also a layer of shock absorption foam inside, which is fully protective.

The attachment is simple and practical.

The vest in the memory adopts the classic pure white design of HOF, and its appearance is treated by electrophoresis process, with high gloss section and HOF LOGO shape. It is not only full of personality, but also full of texture.

Close up of HOF LOGO.

At a glance at the back of the memory.

Close up of the tag. This memory supports Intel XMP 3.0 technology, and its frequency is up to 7600MHz after being turned on. At the same time, its timing is controlled to a lower C36-46-46-122.

The memory supports RGB light effect. The top light guide bar with the side hollowed out HOF LOGO outline can create a penetrating dynamic light effect, which is more flexible as a whole, and also supports the light control of major board manufacturers Software , full of playability.

In addition to selecting high-quality particles, the details of the memory are also very exquisite, with a kind of artistic texture.

3、 Test and overclocking experience

The test platform is as follows.

Load the memory into the test platform.

Close up one.

Let's have a look at the light effect diagram first.

Memory top light effect.

Memory front light effect.

It is more in line with the temperament of HOF memory when it is turned into pure white.

Close up of white light effect.

The system used in this test is Win11 64 bit, a main board The BIOS version is the latest 0904, and the memory XMP technology is also enabled.

The memory SPD frequency is 4800MHz, and the timing is CL 40-39-39-76.

The XMP frequency of the memory is 7600MHz, and the timing is CL 36-46-46-122.

Start testing, CPU -Z Benchmark starts.

Compared with the performance when XMP is not enabled, it can be seen that the performance of single core and multi-core is slightly improved when XMP is enabled compared with the default frequency.

7-ZIP compress 、 decompression Benchmarking.

In this test, the compression performance and decompression performance of the system are significantly improved when XMP is enabled compared with the default frequency.

AIDA64 Memory and cache benchmark.

In this test, the performance of memory reading, writing and copying has been greatly improved when XMP is enabled compared with the default frequency.

The delay has also been greatly reduced.

We media video transcoding performance test is conducted here by using my commonly used editing software, Meow Studio.

It can be seen that the time spent in video transcoding is shortened by 33s when XMP is enabled compared with the silent frequency, that is, the transcoding time is shortened by 33.33% only by the increase of memory frequency, which is still very exaggerated.

Professional rendering test V-Ray CPU rendering test.

It can be seen that in the professional rendering class test, high-frequency memory is still very advantageous. The rendering speed of the system has been greatly improved when XMP is turned on compared with the default frequency.

Graph theory performance test, 3Dmark Fire Strike test.

In the 3Dmark Fire Strike test, the total score, physical score and graphic score were slightly improved when XMP was enabled compared with the default frequency.

3Dmark Time Spy test.

In the 3Dmark Time Spy test, when XMP is enabled, the total score and graphics score are slightly improved compared with the default frequency, and the physical score is significantly improved.

For the game performance test, we selected such games as Survival of the Jedi: Escape, Total War Legend: Troy, Isle of Solace 5, Isle of Solace 6, Civilization 6 and Rainbow 6: Siege to test.

At 1080P resolution, when XMP is turned on, compared with the silent frequency, the frame rate of all games has significantly increased, the most prominent of which is Rainbow Six: Siege, which has increased by up to 104.00 frames. In addition, games such as Jedi Survival: Escape, and Island 5 have also increased significantly, reaching 39.06 and 38.00 frames, respectively, So for players who like to play such games, they should use high-frequency bars decisively.

At 1440P resolution, when XMP is turned on, compared with the silent frequency, the frame rate of each game still has a significant increase, of which Rainbow 6: Siege is still the largest, reaching 47.00 frames, followed by Islet 5 and Civilization 6, increasing by 22.00 and 20.98 frames respectively.

Although this pair of memory already has 7600MHz high frequency, it still has certain overclocking potential.

After some exploration, it easily exceeded the high frequency of DDR5 8200MHz, while its timing remained at the level of C40-48-48-104.

It can light up and enter the system.

It can also pass the AIDA64 test. At this time, its read and write speeds exceed the 120GB/s threshold, and its replication speed also approaches the 120GB/s threshold. At the same time, its latency is further reduced to 55.1ns.

To sum up, we can see that the memory read, write, and copy performance of the overclock to 8200MHz is very strong.

At the same time, the delay is further reduced.

It should be noted that I only ran the AIDA64 test at this frequency. For other applications, there was no detailed test. If you want to use it stably, you must pass the Memtest toaster test.

In this test, the Yingchi HOF EXTREME 50 2TB is also used.

Yingchi HOF EXTREME 50 2TB is a rare PCIe 5.0 SSD on the market at present. Its read speed exceeds 10000MB/s. Its performance can be described as horrible.

Its outer packaging still adopts the classic HOF white.

Back view.

The internal packaging is also quite powerful, very protective.

Although the PCIe 5.0 SSD is fast, it is also very hot, so the SSD accessory is equipped with a fan as standard radiator The radiator adopts a layered design, which can adapt to single-sided or double-sided SSD particles. Its surface is treated with electroplating technology, and the texture is excellent.

At a glance, there is a master chip, a cache chip and two Nand particles on the front of the SSD.

The main controller is the group connected Phison PS5026-E26, which adopts a 12nm process and supports the PCIe 5.0 specification. It is a rare solution that supports the PCIe 5.0 interface at present.

There are also two Nand particles on the back of the SSD.

As for the specific performance of this SSD, there will be a special test in the future. Please look forward to it.

In this test Graphics card It is IMC RTX 4070Ti Star OC.

Front view of graphics card outer package.

The back of the external package of the graphics card is at a glance.

The graphics card adopts the Star III cooling system, which, together with three 102mm fans, can bring stronger wind force and larger air volume, thus ensuring the heat dissipation effect.

The shell of the graphics card adopts transparent diamond cutting design, which has a very advanced texture. The transparent upper cover supports RGB light effect, and adopts a detachable design, which has high playability.

The graphics card adopts 12VHPWR power supply interface.

Video output interface at a glance, 3x DP 1.4a+1x HDMI 2.1 has become the standard configuration.

The white sprayed metal backplane is also a standard configuration, giving consideration to the color value and practicality. The rear end of the backplane is hollow, which can improve the heat dissipation efficiency.

The accessory of the graphics card provides an exclusive Xingyao bracket, which can adjust the height freely, and also supports the ARGB light effect, with high practicability and playability.

4、 Summary

From the actual measurement experience, Yingchi HOF Pro DDR5 7600 16G × 2 is indeed a very excellent DDR5 memory product, which not only has 7600MHz ultra-high frequency and C36-46-46-122 ultra-low timing; At the same time, the white vest has outstanding design and exquisite workmanship, which brings a very good texture and appearance to the product; In addition, it has a very flexible and cool lighting effect, which can be said to give consideration to both the interior and the exterior.

The only drawback is that its price is relatively high, so it is not suitable for players seeking high cost performance. Of course, for some players who have sufficient budgets and don't like tossing about, it is undoubtedly a very troublesome and time consuming thing to tossing about memory overclocking. The emergence of this set of memory undoubtedly provides them with a simple and crude choice. If they want to buy high-end and high class memory, they can simply buy it to start XMP without complicated settings and debugging.

That's all for sharing. I hope it will be helpful for you to configure the machine. Thank you!