The Gigabyte b250-hd3 supports 3000 memory modules of ddr4, memory type DDR4 error correction, memory socket 4 × DDR4 DIMM, maximum memory capacity 64GB, and memory description supports dual channel DDR4 3200 (OC)/2133MHz memory. The details are as follows: 1. Hard disk controller is not automatically recognized This error is likely to occur when installing the system with a non genuine CD of an individual operating system.The reason is that the hard disk controller drive automatically loaded with non genuine discs does not meet the needs of the computer itself.In this case, it is recommended to install the operating system with a genuine CD. 2. Manually update the wrong driver The Windows operating system works normally, but the driver update of the hard disk controller manually is incorrect, causing this failure.The solution is to enter the Windows system advanced menu, select the last normal configuration, and then enter the system normally. 3. Caused by changes in bios settings The Windows operating system is normal, but for some reasons, the user modified the bios settings, resulting in 0x0000007b failure.
This motherboard is designed for the middle and low end. It may be difficult for the high end frequencies above 2400MHz of DDR4.It is recommended to select a 3000MHz memory that matches the performance of the motherboard or is slightly lower to ensure stable operation
Gigabyte B250-HD3 motherboard theoretically supports DDR4 memory, but the specific size of 3000MHz or 2400MHz depends on whether your memory module meets the specification requirements of the motherboard.Generally speaking, it can be compatible with memory with higher frequency, but the actual operation may be limited by other factors of the system
