The reasons for initialization failure are: Reason 1: Shortcut error The application could not be hooked, and the shortcut could not be started. Solution: Delete the shortcut and recreate it, or reinstall the program. Reason 2: No acceleration software of DirectX8.0 or above is installed Solution: Install DirectX8.0 or higher acceleration software. Cause 3: The card model is not correctly identified Solution: Run the Config.exe program to identify the card model. Cause 4: The power supply is not ATX power supply or the power supply is not enough Solution: Replace with high-power ATX power supply. Cause 5: Poor board contact Solution: Reinstall the board. Reason 6: Incompatible software and card Solution: Contact the product supplier. Cause 7: Bad card Solution: The availability of each card needs to be confirmed. Cause 8: The PCI slot is damaged Solution: Replace the slot for use.
The reason is that I didn't recognize the hardware. I unplugged the TV card, rubbed the golden finger with an eraser, and then installed it. I confirmed that the driver was installed, and it was good to start. I also have a TV card on my computer, so I am familiar with this problem. You can try it, if you can't, HI me, or leave a message!
The driver is not installed properly, the software parameter configuration is disordered, and the compatibility of the operating system, board and computer bottom layer is problematic