Switch with reset key: TL-SL2210webTL-SL2218web、TL-SL2428web、TL-SL2452web、TL-SG2109web、TL-SG2216web、TL-SG2224web。The reset method of these switches is the same as that of the router: power off first, press and hold the RESET key, and the reset is successful when all lights flash at the same time.The default management address is 192.168.0.1, and the default user name and password are supervisor/supervisor;TL-SF2108P, TL-SF2109P, TL-SF2808P, TL-SF2216P, TL-SF2224P, TL-SF2232P, TL-SL2226P, TL-SF2008, TL-SF2117P, TL-SF1016V, TL-SF1024V, TL-SG2008 Reset method: This series of switches are managed using the TP-LINK SSC program, and can be logged in without using the user name and password;Reset method for TL-SF3226P, TL-SF3008, TL-SF3117P and some WEB managed switches: connect the switch through the serial port, log in to the switch using the super terminal, and there is a prompt interface before starting the switch. Press the CTRL key to enter the bootmenu. When you see the Please Input Bootrom password, press Enter directly, and then select 3: Restore factory default setting in the interface that appears,Restore the switch to the factory settings, and finally select 5: Reboot.The default management address is 192.168.0.1, and the default user name and password are supervisor/supervisor.
In this case, you need to have a router and configure it. If the router has multiple interfaces, you can connect the network cables of both computers (if DHCP is set on the router, the computer can get the IP by itself; if not, you need to set the IP on the computer). If there is only one router, you can connect the switch first and then connect the two computers to the switch,Same settings
The network cable interface of the campus network connected by the router should not be connected to the main port. The machine should not be connected to the main port