Steps from computer to machine tool: 1. First, create a txt file on the computer to program it (or use software to generate programs). 2. Click the DNC transfer key on the machine. 3. Select the program you want from the folder you want to open again, and click the "Open" button. 4. Press "Program" - "Edit" - "Enter Program Name" - "Enter" on the machine tool====OK
Have you set the jumper yet?The computer end is RS232 (9-pin connector), and the machine tool end is a three wire serial port connector (25 pin).The communication baud rate of machine tool and computer shall be consistent.As long as the line is correct, the other operations should follow the instructions. Set Bit5 (RS232) of parameter NO.00 2 to 1;ValuePoint No.04 4 Set communication baud rate