The driver can be removed and reinstalled for trial operation. The test page can be directly pressed on the printer, and it can be used without the driver
The printer installation is generally divided into two parts. One is the connection between the printer and the computer, and the other is the installation of the printer driver in the operating system.If the printer is equipped with a USB interface, it is OK to directly connect one end of the printer's USB cable to the printer and the other end to the computer's USB interface without turning off the computer host and printer during installation. After connecting the printer to the computer according to the above steps, turn on the printer power first, and then turn on the computer switch. After entering the operating system, the system will prompt that a printer has been found. The system can use the printer only after installing the printer driver.Some operating systems (such as Windows XP) have their own printer drivers, which can automatically install most common printer drivers.If the operating system does not have a driver for this printer, you need to put the driver disk (floppy disk or CD) attached to the printer into the computer, and then install it according to the system prompts. If the printer is directly connected to the local computer, select the local printer;If the printer is not connected to the local computer, but connected to another computer (the local computer uses the printer on another computer through the network), select another printer.In this example, select the local printer.After clicking, the system will provide a list of printer manufacturers and printer models. You can use the print driver provided by the Windows operating system, select the printer driver in the list, and then click.If there is no driver for this printer in the list, you can install the driver provided by the manufacturer attached to the printer. If the operating system is Windows 2000/XP, when you plug the USB printer cable into the USB interface of the computer, the system will prompt you to find a new printer, follow the prompts to put the drive CD into the CD-ROM drive, and click OK,At this time, the system starts to search for the driver of the printer. When the system finds the driver of the printer, click OK. At this time, the system starts to copy files from the CD, install the driver, and finally prompts that the installation is complete. Click Finish.
This has to be analyzed in detail. I initially concluded that the installation method of the new equipment was improper. However, it is better to find professional personnel to repair it. The service at OKI repair shop is up to standard. The address of the repair shop is on their official website
