For the use of the heating function of the automobile rear-view mirror, we should first make it clear that the rear-view mirror heating and the switch of the front windshield wiper are completely independent.That is to say, as long as the mirror heating switch is turned on, the system will start the mirror heater, which has nothing to do with the switch of the front windshield wiper.Therefore, the following items should be noted during use: 1. Before starting the vehicle, please confirm whether the rear-view mirror has been cooled, and set the corresponding button or knob to the "off" position. 2. After starting the vehicle, wait several seconds to ensure that the system loading is completed. 3. Once the system is loaded, you can adjust the temperature gear of the rearview mirror.Generally, we recommend setting the temperature at an appropriate level (such as 40 degrees or 50 degrees) to avoid accidental damage caused by excessive heating. 4. When it is necessary to use the rearview mirror heating function in bad weather, please ensure that the front windshield wiper is also turned on at the same time to ensure the best vision and safety. In a word, when correctly using the heating function of the rearview mirror, please pay attention to the setting of the temperature gear, the confirmation of the cooling state and the cooperation with the front windshield wiper.Only in this way can we ensure our driving safety and extend the service life of rear-view mirrors and other components.
BMW 5-series rear-view mirrors are intelligent temperature controlled. They can work automatically as long as the wipers are turned on. When the corresponding indicator lights up, the heating of the exterior rear-view mirrors will start automatically.The rearview mirror heating function will sense the temperature when the car is started, and it will automatically start when the temperature is lower than 15 degrees.
The BMW 5-series rearview mirror only needs to turn on the automatic sensing switch of the wiper.The rearview mirror heating function will sense the temperature when the car is started, and it will automatically start when the temperature is lower than 15 degrees.This function is used by the computer to judge whether to heat the rear-view mirror and to what extent according to the current outdoor temperature and whether the wipers are turned on.
The BMW 5-series rearview mirror is very useful for heating in rainy days. It can heat the electric rearview mirror, that is, the mirror on both sides of the window.The rear-view mirror heating function means that when the car is driving in rain, snow, fog and other weather, the exterior rear-view mirror can be heated by the electric wire embedded behind the lens to ensure that the surface of the lens is clear.The rear-view mirror is only heated slightly to let the fog on the glass surface dissipate.If it is a water drop, it cannot be heated and evaporated immediately.
The working principle of electrically heated rear-view mirrors is very simple. It is to install an electric heating plate (electric heating film) in the lenses of the rear-view mirrors on both sides. In rainy and snowy weather, the owner turns on the electric heating function of the rear-view mirrors, and the electric heating plate will quickly heat to a fixed temperature within a few minutes, generally between 35-60 degrees Celsius, so as to heat the lenses, defog and defrost them,It brings great convenience to the driver.
(Picture/text/photo: Q&A Beast) Quest M5 Trumpchi GS8 AION V Macchiato DHT PHEV Latte DHT HiPhi X @ 2019
Is your question about the heating of the rearview mirror? If so, the rearview mirror heating function is usually set to start when the temperature is lower than 10 degrees Celsius, to prevent drivers from losing sight of the rearview mirror and causing safety hazards.In addition, some models also have an automatic shutdown function, which will automatically cut off the power supply when reaching the preset temperature or not in use for a long time.I hope the above content can help you!
The switch of BMW 5-series rearview mirror heating is on the key in the driving mode adjustment area. There are three keys in total: automatic, sports and economic mode.The BMW 5 Series rearview mirror heating needs to be turned on in the automatic mode before the rearview mirror heating can be used normally.How to use the BMW 5 Series rearview mirror heating function: first start the vehicle;Confirm whether the rear-view mirror has rain eyebrows. If there are rain eyebrows, it is unnecessary to open the rear-view mirror for heating;Secondly, set the vehicle to automatic mode;Confirm whether the rear-view mirror of the vehicle starts heating again. If it is not hot, switch the mode again.
BMW 5-series rearview mirror heating can play a good role in winter.First, let's understand the working principle of rearview mirror heating.When the vehicle is started, the current will generate heat through the rearview mirror heating element.This kind of heating element is usually composed of resistance wires, which will produce high temperature and high voltage under working conditions. In addition, the rearview mirror heating function of BMW 5 Series can also play a good role in rainy days.When rainwater sticks to the rearview mirror, it will affect the driver's vision and safety.However, after the heating function of the rear-view mirror is turned on, the rainwater will evaporate quickly, thus ensuring a good view of the driver. In addition, before using the rear-view mirror heating function, you must first turn on the vehicle's air conditioning system and ensure that the heating in the vehicle works normally.Otherwise, the heating element may not work properly and be damaged in a humid environment. In a word, the rearview mirror heating function of BMW 5 Series is a very practical configuration, which can bring safety and convenience to drivers in winter and rainy days.
