In CAD2010, if the size of O offset in the past is not correct, there may be the following reasons: 1. Offset distance setting error: check whether the offset distance in the O command parameter is set correctly.Make sure that the offset is set to a dimension value relative to the outside of the workpiece boundary. 2. Text style problem: If a custom text style is used, you need to pay attention to whether the text style supports hypertext tags (HTML tags).If so, try using the default text style. 3. Text position error: confirm whether the dimension position is correct.Sometimes, the dimension will be left or right, resulting in the wrong dimension offset in the past.Adjust the dimension position. 4. Mismatch of engineering units: If different measurement systems are used, attention should be paid to the matching of engineering units when dimensioning.If it does not match, it will lead to inaccurate dimensions offset in the past.Ensure that all dimensions use the same system of measurement. 5. Text size problem: If super small or super large text size is used, the size may be inaccurate in the past.Try using the default text size to identify the problem. The above are the common reasons and solutions for the wrong size offset in CAD2010. I hope they can help you.If you have more questions, please feel free to ask.
The wrong size of O offset in CAD2010 may be caused by the following reasons: 1. Incorrect offset distance setting: correct offset distance needs to be set during offset operation.If the distance is set too large or too small, the size will be inaccurate.You can try adjusting the distance value and recalculate the size. 2. Incorrect layer setting: when dimensioning, it is necessary to select the correct layer for dimensioning.If the wrong layer is selected or the hidden layer function is turned on, the size will also be inaccurate.Pay attention to the layer settings and ensure that the correct layer is selected. 3. Text style setting error: when dimensioning, you also need to select the correct text style and font size.If inappropriate text style and font size are used, the size will be inaccurate.Try changing the text style and font size to solve the problem. In addition, if none of the above methods can solve the problem, it may be caused by the compatibility problem of the software itself or other deeper reasons.It is recommended to contact CAD technical support personnel for help in solving problems.
In CAD2010, if the size of O offset in the past is not correct, it is likely to be caused by the following reasons: 1. Incorrect precision setting: when dimensioning, you need to manually set the precision of dimensions.If you do not set it correctly or select an inappropriate precision level, the dimensions will be inaccurate. 2. Coordinate system error: before dimensioning, it is necessary to determine the correct coordinate system.If you use a coordinate system that does not match or if the coordinate system changes, it will also cause dimension errors. 3. Text alignment error: When dimensioning, you need to select a proper text alignment.If you select an inappropriate alignment, it will also cause dimension errors. 4. Error in offset setting: During the O offset operation, you need to enter the correct offset in the command line.If you do not enter the correct value or select an inappropriate offset type, it will also cause dimension errors. In addition to the above points, there may be other reasons for dimension errors.The solutions include resetting the precision, determining the correct coordinate system, adjusting the text alignment, and so on.
