When the laptop is flooded, first disconnect the power supply and avoid re energizing.Turn the B/C side (keyboard side and screen side) of the notebook downward to prevent water from entering key parts such as the motherboard.In order to ensure the cleanness and inspection of internal components and computer components, it is recommended to go to the service station or external maintenance department for treatment.Factors such as price and maintenance quality shall be comprehensively considered when selecting maintenance locations.
It should be noted that even if the laptop is within the warranty period, water ingress will lead to the invalidation of the warranty.Therefore, the service station needs to bear the cost when carrying out maintenance, and the price of the service station is relatively high, but the accessories and maintenance quality provided by the service station are relatively reliable.The external maintenance department usually has a low price, but its maintenance quality depends on such factors as the level of technicians and the quality of parts. There are certain unstable factors in this regard.
Therefore, when deciding which side to choose for inspection and maintenance, the owner can first consult the price difference, and then measure which side to choose according to the price.
Notebook after-sales hotline: 400-669-9965 The reason and solution of notebook computer blue screen 1、 Hardware 1. Excessive overclocking What it looks like: It may not be a problem just after starting up, but the blue screen will appear after running for a period of time Excessive overclocking (CPU overclocking and video card overclocking are common). Due to the overload operation of hardware, too much internal calculation is caused, which overheats the CPU or video card, resulting in system calculation errors. 2. Poor computer cooling Check whether the computer cooling device is normal. If the cooling system is not good enough, the main board may be burned 3. Poor contact or damaged memory module Phenomenon: sometimes the screen is blue when it is turned on, and sometimes it runs for a period of time A small part of the computer blue screen phenomenon encountered in actual work is also due to poor contact of the memory module (mainly due to the computer being affected with moisture and the oxidation of gold fingers in the memory, so you can go to the maintenance center for inspection) 2、 Hard disk bad track or data cable problem Phenomenon: Generally, the screen is blue when the system is started The blue screen of bad tracks on the hard disk is due to the failure of an area of the hard disk, Handling method: go to after-sales service for testing assistant 3、 Software 1. Blue screen caused by individual software or driver 2. Computer poison 3. The operating system is damaged
1. Do not start the laptop if it cannot be started due to water ingress. In general, do not rush to start the laptop after water ingress. Unplug the power immediately, turn off the computer, and wipe the water off the surface.2. After wiping the water on the laptop surface, remember not to dry it with a hair dryer, which may accelerate the flow of water inside the laptop.3. Some laptops have designed drain holes, so users can view the instructions and then let the water drain from the drain holes.It should be noted that the computer should not be turned on immediately after treatment, and should be placed in a ventilated and cool place to dry for several days.4. It is also OK to send the computer to a nearby after-sales and computer repair shop for inspection. If the whole computer is immersed in water, you need to go to the computer after-sales service.For more information on how to operate the laptop when it is flooded, go to:https://www.abcgonglue.com/ask/37c3071615826737.html?zdSee more
1. First, turn off the power of the laptop system immediately, and remove the power cord and battery at the same time 2. Then wipe the liquid on the laptop keyboard and machine surface with a clean rag or tissue 3. Move the laptop near the sink and tilt the laptop 90 degrees to pour out the residual liquid in the computer system and keyboard 4. Wipe the liquid on the keyboard and machine table surface again with a clean rag or tissue 5. Allow the laptop to stand for 24 hours to dry the liquid inside. Do not use a hot air blower to dry it to avoid overheating and deformation of the case 6. Reconnect the power supply of the laptop and try to start it. If it can be started normally, please first back up the important data in the computer 7. No matter whether the laptop can be used normally or not, it is recommended to contact the service center immediately after the test and arrange inspection and maintenance to avoid sudden failure caused by oxidation and rust
