The steps to connect the DVR to the computer are as follows:
1. If you want to connect in the LAN, you need to set the IP address of the hard disk recorder and the computer in the same network segment.If you directly use the network cable to connect, the method is the same. Just set the IP address to the same network segment and use a cross network cable to connect to access the DVR through the Internet.
2. If there is only a single hard disk recorder, there is no need to purchase a switch in this case.You can connect the DVR to the computer by using a cross type network cable (A head at one end and B head at the other end).Access and control the hard disk recorder through the browser: use the Internet Explorer browser, enter "IP address of the hard disk recorder: port number" in the address bar and press Enter to open the login page, and enter the administrator account and password in the login page to complete the login.
3. The DVR itself is a host with independent recording, operation and other monitoring functions, and does not need to be connected to the computer.Even if connected to the computer, the DVR can record normally.Most of today's DVRs support network access.Just connect them to the computer with a network cable, install CMS software or access their IP address through a browser to play the recorded monitoring video.
Through the LAN, set an IP address for the video recorder, and then click the IP address of the video recorder in the notebook browser to preview the image and play back the video
Basic steps for remote monitoring and setting of Hikvision hard disk video recorder (this network environment is a small LAN connected to the Internet through a router): 1、 First, open the hard disk recorder and set the static IP address. It is in the same network segment as the LAN computer, such as 192.168.10.88 2、 Open the tp link 745 router, and add the IP addresses 192.168.10.88 and 808000554 of the DVR to the forwarding rules. 3、 Open the peanut shell interface of the router, register an account, log in the ID you just applied for on the router, and select ddns.Login will succeed later. 4、 Open the network parameter interface of the DVR, select the peanut shell, and then enter the peanut shell account and password you just applied for.Click OK to close the interface. 5、 Restart the router and the DVR successively.You can open the free domain name you just applied for in the browser, and enter the monitoring user name and password to view the remote monitoring.
