When installing the wireless network card driver, the blue screen appears, which may be caused by the incompatibility between the driver and the operating system.It is recommended that you first try to install using other compatible drivers, or contact the manufacturer to obtain the latest driver version.In addition, make sure your computer is connected to a stable network, and update the operating system and drivers for better compatibility and stability.If the problem still exists, please consider reinstalling the operating system or seeking professional help to solve the problem.
That's because your driver didn't download. Yes, otherwise, it wouldn't be blue screen You can update the driver to enable Tencent Computer Manager's hardware detection function. The hardware model it detects is very detailed, so the driver is not compatible, which can avoid many inexplicable problems
Laptop failure is the most normal thing when we use computers.After a laptop is used for a long time, it will become unresponsive, infected with Trojan viruses and other problems. Even anti-virus software can not check it.Then, when the computer is paralyzed and cannot be used, reinstalling the system is a big way.How to reinstall the system?At present, there are XP and Win7 notebook mainstream systems, and there are many ways to reinstall them. The following editor will teach you two relatively simple and easy to understand methods.
1、 System reinstallation method without using CD and USB flash disk You can restore your operating system to its original state in five easy steps without using a CD or a USB flash disk to install the system (only the system disk is restored, and no operation is performed on other disks).
The system installation steps are as follows: Step 1: Download Jinshan Reload Expert.
Step 2: click the [Reinstall Detection] button in the main interface.This tool does not need the system CD, and reinstalls the system with one key;Automatically backup/restore important data, and fully support win xp and win7.
Step 3: The tool divides the system installation steps into five steps, namely, environment detection, data backup, system reinstallation, data restoration, and reinstallation completion. Such system installation steps are extremely simple, completely reducing unnecessary operations for you, and greatly shortening the system installation time.
Prompt to restart. The reinstallation can be completed after three restarts.
2、 Method of reinstalling the system with CD 1. Setting the optical drive startup (1) Find a WINDOWS XP installation CD with startup function and put it in the CD drive. (2) Restart the computer and press F2 to enter CMOS settings during POST. (3) Select Advanced CMOS Setup and press Enter to enter. (4) Move ↑, ↓ to Boot Device Priority, and press Enter to enter. (5) Move ↑, ↓ to 1ST (that is, the first startup device, and 2nd, 3rd, 4th represent the second, third, and fourth startup devices) and press Enter to enter. (6) Move ↑, ↓ to CD/DVD, and set the Enter key successfully. Note: After entering this item, there are four options, which respectively mean: Disable: Disable, IDE-0: Boot from hard disk, Floor: 1.44MB 3 1/2: Boot from 3.25 inch 1.44MB floppy disk, CD/DVD: Boot from ordinary optical drive or DVD optical drive. (7) Press F10 and the letter "Y" to save the settings. After saving, the computer will restart.
2. To install XP After the computer restarts for self inspection, the words BOOT FROM CD will appear at the bottom or top of the screen, indicating that the computer will boot from the optical drive.The prompt "Press qny key to boot from CD" (meaning that pressing any key will boot from the CD drive) will appear later, and the time points will increase from 1-5 points in turn, meaning that you will wait for 5 seconds. If you press any key within 5 seconds, you will boot from the CD to enter the installation of XP. If you press any key within 5 seconds, you will boot from the hard disk to enter the originally installed system. Important Note: ★ There are three restarts to install XP: the first time is to set the CD to start;The second time, the installation program copied the system installation files from the CD;The third time is when all necessary system files and applications have been copied to the computer, the installation is basically completed, and the settings are saved before restarting. ★ If you set the CD boot back to the hard disk boot or other devices boot after the first reboot, the word BOOT FROM CD will no longer appear. If not, the word BOOT FROM CD will appear again. Please do not press any key within 5 seconds during the next two reboots, otherwise the process of re creating files will be repeated. ★ After the XP system disk lights up, it is the installation interface with a blue background. At this time, the system will automatically analyze the computer information without any operation until the display screen turns black, and then the Chinese interface with a blue background appears.At this time, the protocol of XP system appears first. Press F8 (representing agreement with the protocol), and then you can see the information list of all partitions of the hard disk, with Chinese operating instructions. ★ Select the C disk, press the D key to delete the partition (remember to back up the useful files of the C disk first),The location of disk C becomes "unpartitioned", and then press C to create a partition in the original location of disk C (that is, the "unpartitioned" location) (Note: If the previous system is damaged by a virus and cannot be repaired, it is recommended to delete all the hard disks, re partition them, and then format them after the installation is completed, so that the virus left in the hard disk can be completely removed). ★ After that, the original C disk position becomes "new unused", press Enter to continue.Next, the option page of formatting partition may appear. It is recommended to select "Format partition with FAT32 (fast)".Press Enter to continue. ★ The system starts to format the C disk, which is very fast.After formatting, the analysis of the hard disk and the previous Windows operating system are also fast, followed by copying files, which takes about 8 to 13 minutes (depending on the configuration of the machine).After copying files (100%), the system will automatically restart. When you see the Press qny key to boot from CD again, you do not need to press any key to start the system from the hard disk, because part of the installation files have been copied to the hard disk (note: the CD cannot be removed at this time). ★ The color XP installation interface with blue background appears, and the installation progress bar and remaining time display are on the left. The starting value is 39 minutes, which is also determined by the configuration of the machine. The installation time of computers with higher configuration is about 15 to 20 minutes.At this time, until the installation is completed and the computer restarts automatically, there is no need to do anything other than enter the serial number and computer information (fill in at will) and press Enter 2-3 times.The system will automatically complete the installation.
3. Install Driver (1) After restarting, remove the CD and let the computer boot from the hard disk to enter the XP settings window. (2) Press Next, Skip, select Don't Register, and Finish. (3) Enter the XP system desktop.Right click the desktop, select "Properties", select the "Display" tab, click the "Customize Desktop" item, check "My Computer", and select "OK" to exit. (4) Return to the desktop, right click "My Computer", select "Properties", select the "Hardware" tab, and select "Device Manager". Inside is the management window of all computer hardware. All the options with yellow question mark+exclamation mark in front represent the hardware without driver installed. Double click to open its properties, and select "Reinstall Driver",Insert the corresponding driver CD, select "Auto Install", and the system will automatically identify the corresponding driver and complete the installation.(AUDIO is a sound card, VGA is a video card, and SM is a motherboard. You need to install the motherboard driver first. If there is no SM item, you need not install it.).Then restart the computer. In fact, through the CD reinstallation method, the steps of Win7 and XP are very similar and simple.Don't be afraid to do it. I bought a CD and installed it once before. Although there were some small details in the middle, I finished it successfully.So I believe everyone can!
