The gigabit router can support the transmission rate up to 1000Mbps (1Gbps), so it can theoretically run the bandwidth of 1000M optical fiber.However, whether this speed can be achieved completely depends on many factors.
First, make sure that your network devices, including computers and mobile phones, support Gigabit Ethernet interfaces and use appropriate network cables for connection.If any device only supports interfaces lower than gigabit, the transmission rate of the entire network will be limited.
Secondly, consider the processing capacity and performance of the router itself.Some cheap or old models of routers may not be able to handle a large amount of data traffic at the same time, resulting in a decline in transmission rate.It is recommended to select a brand and model specifically designed for high-speed Internet, and ensure that its hardware configuration is strong enough.
Finally, network congestion may also affect the actual transmission speed.Even if you have a 1000M optical fiber connection, you may still encounter bottlenecks and restrictions during peak hours or when sharing network resources with other users.
To sum up, in order to maximize the use of 1000M fiber bandwidth, please select a gigabit router that is appropriate and conforms to standard specifications (such as IEEE 802.11ac), and ensure that all relevant equipment can support the corresponding interface and transmission rate.In addition, ensure the stable performance of network equipment, and try to avoid network congestion, so that it is possible to achieve the highest speed transmission.
The routing through all gigabit ports is not satisfactory (less than 960 Mbps), and the routing using 2.5 G ports can work at full capacity, even more than 1200 Mbps is not surprising, because the bandwidth of the access operator is usually 20%.In one step, ASUS web spider race routing is recommended, with dual ports of 2.5G, which really reaches the transmission limit.Baidu can be specific.
Theoretically, it can be. In fact, there may be slight deviation according to equipment, lines, etc. For the wireless part, the router and terminal must support at least 5G mimo 2x2, otherwise the speed difference is too large
Yes, any 100 yuan gigabit router can run full of limited ports. If there is loss, it is less than 5%. However, the wireless WIFI speed may not be full, and only routers and mobile phone and notebook wireless network cards that support 3X3 or even 4X4 antennas can do so.
The routes of all gigabit ports can not run well (below 960Mbps), while the routes with 2.5G ports can run fully, and it is not surprising that even 1200Mbps can run out, because the access bandwidth of operators is generally 20% bandwidth.If it is done in one step, we recommend Asustek's Red Spider E-sports route, with dual 2.5G ports, to truly achieve extreme transmission.Baidu can give you more details.
