The laptop boot card is on the logo interface. It is OK to enter the bios. Please help
Ask online customer service
Scan the code to ask online customer service
Unplug the battery and press the power on button. I have tried. I can't by the way mention that sata in Bios does not have the Ide mode. The laptop is the Shenzhou k650d
If your laptop power card is on the logo interface, but you can access the BIOS, it may be caused by the following reasons:
1. Hardware failure: there may be a problem with the hard disk, memory or other components.You can try to reinsert the hard disk and memory module to determine whether there is loose contact, and check whether there is obvious damage.
2. Operating system error: The operating system may have errors or file corruption.Try using a startup repair tool such as Windows PE to repair the operating system.
3. BIOS setting error: Some incorrect BIOS settings may also cause failure to start normally.Make sure the BIOS settings are correct, such as boot order and hard disk mode.
resolvent:
1. Reset BIOS settings: After entering BIOS, find the Restore Default option and select it to reset all settings to the default values.Then save and exit the BIOS, restart the computer to see if it can enter the operating system normally.
2. Check the hardware connection: confirm that all hardware components are firmly connected and are not loose or damaged.Pay special attention to the hard disk and memory module.
3. Start in safe mode: press F8 to click continuously, and select safe mode to start the computer in advanced boot options.If you successfully enter the safe mode, it indicates that the problem is probably related to the driver or third-party software.
4. Reinstall the operating system: If the above methods do not solve the problem, you can consider reinstalling the operating system.After backing up important data, reinstall the operating system using the installation media or recovery partition.
If you are not sure how to proceed with the above steps or want a more accurate solution, please contact the laptop manufacturer's technical support department for help.
Search: Dell laptops only have the LOGO interface when they are powered on. They cannot access the bios system, and the screen will be blank after passing the logo
