1. To turn on the self-cleaning function of the air conditioner, press and hold the light and timing keys for about 3 seconds at the same time when the machine is turned off (the specific key positions are subject to the instructions).After this operation, the display screen of the air conditioner will display "CL".
2. The self-cleaning process takes about 30 minutes to run. After completion, the air conditioner will automatically shut down and return to the standby state.
3. During cleaning (high temperature) and sterilization, the temperature in the room may rise slightly. Please pay attention to keeping the room ventilated.
4. If there is much dust in the house, it is recommended to clean it once a month.If there is not much dust in the house, it is recommended to clean it every three months.This will keep the air conditioner in good working condition.
In addition, the following are some precautions when using air conditioners:
-The temperature should be set reasonably during sleep. On some models of air conditioners, the sleep mode can also be used to automatically adjust the temperature. -The outdoor unit shall be installed firmly and reliably to reduce vibration and noise.There should be enough ventilation space in front of the condenser to prevent the shutdown caused by pressure rise due to blocked wind. -There should be no obstacles in front of the indoor unit, or the air outlet will be affected. -When the air conditioner just starts to run, you can select the high speed gear to cool down quickly, and then adjust it to the middle and low speed gear after the temperature drops. -The window type air conditioner can use the ventilation switch for ventilation, but the time for each ventilation shall not exceed 15 minutes.
The above are some basic operations and precautions, which I hope will be helpful to you.If you have any other questions, please feel free to ask.
1. The filter screen should be cleaned every 2-3 weeks. Remove the filter screen, tap or wash it with clean water, and then install it into the panel after drying.
2. The dirt on the casing and panel can be wiped with a dry soft towel or wet cloth. Do not use engine oil, banana water, etc.
3. To clean the inner machine, first cut off the power supply and clean it with a wet soft cloth or brush. The condenser and evaporator can also use a vacuum cleaner to remove dust.
4. Dust on the surface of condenser of outdoor unit can be cleaned
5. When the machine is out of use due to season change, it should be sunny and dry at noon. Put the air conditioner in FAN (air supply) state for 3 hours to dry the machine thoroughly, then turn off the machine and unplug the power plug.Take out the battery that can be stuck on the remote control and put it in a dry place.
6. If the air conditioner has been used for a long time, and the first time it is turned on after shutdown, if there is a damp smell like sewage, the cover must be opened for cleaning and disinfection.
7. Do not place heavy objects on the outdoor unit, and there should be no obstructions around the outdoor unit.
Hello, open the grille to clean the filter screen If you need help, please dial 4006111 111, the national unified 24-hour service hotline of Hisense Kelon Air Conditioner!
