After pressing the button on the Panasonic LCD TV, the green light flashes for a while, then the red light flashes for 7 times and stops once. What should I do
After pressing the button on the Panasonic LCD TV, the green light flashes for a while, then the red light flashes for 7 times and stops once. What should I do
There is a problem with the power circuit. If the red light flashes 7 times and stops once, it means that the main power supply is not supplying power to the inverter. In this case, you have to check two circuits. One is whether there is a power pulse signal?Second, is there a short circuit in the rear inverter?What about maintenance?Replace the bulb of the motorcycle to test it. If the red light still flashes 7 times and stops once, there is a problem with the front circuit!I hope you can find out the reason!!!Give me more points!
If this is the first time, it may be that there is an error in the initialization setting or there is an internal program conflict.You can try to enter the menu and select to restore factory settings (pay attention to backup important data), but it is better to consult professionals to confirm the operation steps before this to avoid greater losses.If it is determined that it is a hardware problem, please contact Panasonic customer service for help
The phenomenon you encounter seems to enter the fault display state.First, make sure that all external devices are properly connected and the system is free from virus interference.If it still doesn't work, professional technicians may be required to perform troubleshooting and repair services. Remember to keep the purchase voucher to enjoy the warranty service
In this case, the TV may enter the self check mode.Don't worry, you can try to press and hold the reset button of the remote control (if any) for more than 10 seconds to force the reset.If there is no improvement, check whether the connecting cable and power supply are stable, or professional personnel may be required to diagnose
It seems that your Panasonic TV may have some small problems.The red light after the green light flashes may be a code prompt, and the next stop of 7 may indicate error code 7.First, try restarting the TV or powering it off for a few seconds to see if it is restored.If the problem persists, it may be a hardware fault or the software needs to be updated. It is recommended to contact after-sales or consult the user manual to find a solution